Product Manual

Setting the Temperature Control

NOTE: The temperature readout shows the actual cellar temperature, it will

temporarily show the set temperature while making adjustments, then reverts

back after 10 seconds.

1. Make sure power cord is connected to a properly grounded outlet.

2. Turn power ON.

3. Set the desired temperature by pushing the UP or DOWN button.

4. Temperatures increase or decrease 1°F with each push of the UP or

DOWN button.

NOTE: Temperatures may fluctuate depending on whether the interior light is ON

or OFF and depending on the position of the bottles.

Removing the Telescoping Shelf

To remove a rolling shelf:

1. Remove all bottles.

2. Pull the shelf out as far as it will go.

3. To take out the shelf, we need to push the left side lever upward and the

right side lever downward.

4. Remove the shelf.

Temperature Settings for Serving Wine