259 Bottle Wine Cellar INSTRUCTION MANUAL PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING AND OPERATING.
TABLE OF CONTENTS Contents ____________________Page # Wine Cellar Package Contents 3 Important Safety & Pre-Use Instructions 3 Installation Instructions (a) General Installation Instructions (b) Layout and Storage (c) Removing Rolling Shelf (d) Rearranging Shelf Layout (e) Installation of Handle 3 4 4 4 5 Operating Your Wine Cellar 6 Temperature Settings 6 Care & Maintenance 6 Troubleshooting Guide 8 Technical Information 9 Warranty Information 9 2
Wine Cellar Package Contents Instruction manual 10 Shelves IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when WARNING using your appliance, follow these basic precautions: Read all instructions before using the wine cellar. DANGER: Risk of child becoming trapped in new cellar, old wine cellar/refrigeration unit, or large boxes.
LAYOUT AND STORAGE Your cabinet was designed to store a maximum number of bottles securely. We recommend that you observe the tips below to optimize loading. Remove tape from shelves once unit is stable and ready for storage. Disperse the bottles evenly to avoid concentrating weight in one place. Bottles must not touch either the back of the cabinet or the step at the bottom. Make sure that the bottles are not all grouped together either at the top or bottom of the cabinet.
WALL GUIDE Fitting the rear part of the guide GUIDE WALL GUIDE WALL Fitting the front part of the guide GUIDE WALL Reposition guide rail to the new location and reinstall in reverse order. INSTALLING HANDLE 1. Pull back the door seal behind handle location. 2. Insert screws into pre-drilled screw holes. 3. Attach handle and tighten screws. 4. Press door seal back into place.
OPERATING YOUR WINE CELLAR Each wine cellar includes an operating panel on the front of the unit. This operating panel includes several features to operate and control the temperature. (((( : Turns the wine cellar system on or off. : Turns the interior wine cellar light on or off. : Increase Temperature : Decrease Temperature BEFORE YOU START: The wine cellar should be placed in a location where the ambient temperature is between 60-77 degrees Fahrenheit.
Wash the outside of the cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. Vacuum the front grill and back of the unit twice yearly. Make sure the power is off before cleaning. It is recommended to clean the unit completely inside and out once a year to maximize the longevity of the wine cellar.
TROUBLESHOOTING GUIDE Many common issues with your wine cellar can be solved very easily. Try the troubleshooting tips below should you experience any problems. PROBLEM Wine cellar does not operate. POSSIBLE CAUSE Not plugged in. The appliance is turned off. The circuit breaker tripped or a fuse has blown out. Wine cellar is not cold enough. Check the temperature control setting. External environment may require a higher setting. (e.g. room needs to be air conditioned) The door is opened too often.
TECHNICAL DATA Item Number 264 01 59 03 Accommodation 259 Bottles or more (bottles) Type of cooling Compressor, direct cooling Climate type N Electricity protection grade I Nominal voltage/Frequency 115V/60HZ Rated power(W) 245 60-77 degrees Fahrenheit Ambient temperature 41-66° F Temperature Range Range of inside cabinet humidity 60%RH Item weight 325 lbs Item dimension (W X H X D) 31 ¾” X 79” X 29 ¾” WARRANTY INFORMATION Please speak to your retailer before calling Wine Enthusiast
