Installation manual

TRAV’LER Multi-Satellite TV Antennas
Accessories & Replacement Kits
10
Accessories & Replacement Kits
Accessories
Various accessories are available for the TRAV’LER antenna, including
Model CL-SK26 control cable extension, Model SKA-004 roller plate,
and Model SKA-008 thin roof plate. Model CL-SK26 is a 25′ power/
communication cable that connects directly to the existing TRAV’LER
power cable to allow runs up to 55′. Model SKA-004 is a roller plate for
protecting a rubber RV roof. Model SKA-008 is a thin roof support plate for
reinforcement at the TRAV’LER antenna mounting location.
Replacement Kits
e following replacement kits are available for the TRAV’LER antenna:
a. Turret Replacement Kits
• SK-LG00, Large Motor Turret for DIRECTV Slimline/SWM3
• SK-SM00, Small Motor Turret for DISH 1000/DIRECTV triple LNB
• RP-SK20,Transition Plate Replacement
b. LNB Replacement Kits
• RP-SK01, DISH1000 - 2780490
• RP-SK05, DIRECTV Slimline 5 - 2780594
• RP-SK09, DIRECTV SWM3 - 2780156
• RP-SK73, Shaw Direct
c. Reector Replacements
• RP-SK11, DISH 1000
• RP-SK33, DIRECTV Triple
• RP-SK35, DIRECTV Slimline 5/ SWM3
d. Sheathed Cables from LNB to Turret with P-Clamp and screw
• RP-SK41, DISH 1000 – 3753873
• RP-SK45, DIRECTV SL5 – 3753881
• RP-SK47, Shaw – 3753895
• RP-SK49, DIRECTV SWM3 – 3753110
e. Back-up and Feed Arm Assembly with No LNB or Sheathed Coax
• RP-SK81, DISH 1000
• RP-SK89, DIRECTV Slimline 5 & SWM3
f. Back-up and Feed Arm Assembly with LNB and Coax
• RP-SK95, DIRECTV SWM3
• RP-SK65, DIRECTV Slimline 5
• RP-SK63, DIRECTV Triple
• RP-SK21, DISH 1000
g. Interior Components
• RP-SK87, Power Supply and 24″ Power Cord
• RP-SK83, IDU
• SKM-854, IDU, Power Supply, and 24″ Power Cord
Accessories available include Model
SKA-004 roller plate and Model SKA-008
thin roof support plate (see fig. 2.12).
A B
FIGURE 2.12. Available
accessories. A, Model SKA-004.
B, Model SKA-008.