Installation&Assembly

6
INSTALLATION INSTRUCTIONS for Wall Mount Range Hood
Parts supplied (Note: The fasteners included may not be suitable to your wall structure. Please check with the
installer on proper fasteners to be used based on the material makeup of your wall)
A. Range Hood
B. Power Cord (attached to range hood)
C. 6” or 8” round vent air flap depending on model. (attached to range hood on top of unit)
D. (2) Drywall Anchor (Wall anchors will vary depending on wall material and the weight of the range hood
being installed. They can be found at any home improvement store)
E. (2) 1-3/16 drywall anchor screw
F. (2) #10 X 3/4 tapping screw
G. Aluminum or Stainless Steel Filters (attached to the bottom of the range hood)
H. Duct brackets: Certain Models have 2 brackets w/4 screws attached, Certain Models have 1 bracket w/2
screws attached
I. (1) 6” or 8” round flexible duct exhaust hose, depending on model
J. (2) Stainless Steel Ducts (inner and outer)
K. (2) #6 X 3/8 SM Screw
L. (2) rubber bumpers and (2) screws. Note: Some models may have bumpers preinstalled. You may not
need the included screws on some models
M. Some models may have a pre-installed grease collection tray. Some models may not have a grease
collection tray
Exhibit A