Owner's manual

W7-03142013
MASTER Rack™ Materials
Wall Flange 20 Gauge (1mm) stamped stainless steel plate
Tubing 18 Gauge (1.2mm), stainless steel tubing 0.75” (19mm) diameter
Cross Tubing 20 Gauge (1mm), stainless steel tubing 0.375” (9mm) diameter
Structural Threaded structural inserts 1”(25mm) long are installed in tube ends to receive 1/4-20 x 1.25” stainless steel screw.
Attachments Concealed filler plates are structurally engineered zinc cast 1/4” x 1 1/8” x 7 1/2” (6mm x 28mm x 190mm)
Finish Stainless steel is polished to a chrome mirror appearance
MASTER Anchor™ Materials
Screws 8-32 x 3.5” stainless steel machine screw
Faceplates and Wings Fire retardant structurally engineered plastics
Tape Double sided watertight tape
Specifications
Installation Install the MASTER Rack™ with the supplied MASTER Anchors™ WINGITS
®
MASTER Anchors™ WMRBS24 (24”) or WMRBS18 (18”)
MASTER Rack™ Details
Installation of the MASTER Rack™ with the MASTER Anchor™ is GUARANTEED!
WINGITS
®
Bradley Beach, NJ USA • Toll Free: 877-894-6448
www.wingits.com • [e-mail]
“A”
“B”