Manual

Technical Data Sheet
Toll Free: 877-894-6448 • www.wingits.com • [e-mail]
WMEDHTPH_SpecSheet_20140324_rev1
WMEDHTPH
WMEDHTPHPS
Polished Finish
WMEDHTPHSN
Satin Finish
Double Horizontal Toilet Paper Holder
MODERN Elegance
™
Height: 2” (5.1cm)
Width: 11.5” (29.2cm)
Depth: 3.5” (8.9cm)
Entire product is 18/8 (304) stainless steel. Solid caps and pins are HeliArc welded to 18 gauge
tube.
WINGITS
®
MODERN Elegance
™
Double Horizontal Toilet Paper Holders are designed to be
installed into adequate structural blocking or with WINGITS
®
MASTER Anchor
™
Fasteners for
MODERN Elegance
™
Bath Accessories (MAWME35).
Use: Wall Installation.
For hollow wall construction, it is recommended that WINGITS
®
MASTER Anchor
™
Fasteners for
MODERN Elegance
™
Bath Accessories (MAWME35) are used with this product.
Weight: 0.9 lbs. (0.4kg)
MECHANICAL DATA
PRODUCT COMPOSITION
MODALITY
INSTALLATION
RECOMMENDED INTEGRATION
Model:
Part Numbers:
Stainless steel screws are included to install into
adequate structural blocking.
Contemporary design combines with PATENTED BridgeBind
™
Technology resulting in a Toilet Paper Holder with:
• Unparalleled strength
• Beauty
• Functionality
• Durability
• No lines for dirt to collect
(maintenance free)
BridgeBind
™
Technology is the result of drilling a hole completely through stainless steel
tubing, inserting a solid stainless steel pin, and HeliArc Welding the pin to the far point of
the tube; solidifying the pin and tube into one piece. Creating the ultimate structural bond.