Manual

| 6 |
Safety Precautions
Using one outlet to power
multiple devices and/or
appliances can generate an
excessive amount of heat and
cause a fire.
If the power plug's contacts are
covered in dust, water, or any
other type of contaminant, wipe
them clean using a piece of dry
cloth before use.
May result in an electric shock
and/or injury.
Do not spray water directly on
any part of the product. May
result in a short-circuiting and/or
electric shock.
Do not install the washer near
a heating appliance or place a
lit candle or cigarette on top of
the washer.
The level of water pressure required for proper functionality
is between 50kPa and 800kPa.
When connecting the water hose, use the hose set that
came with your washer. Do not reuse an old hose set.
Do not exceed the MAX level when adding a liquid detergent
or fabric softener. Going past this level will cause the
detergent or softener to spill over.
May result in an electric shock,
fire, malfunction, and/or product
damage.
In the event of a gas leak,
unplug the power cord and,
without touching the washer's
controls or switches, open the
windows to ventilate.
May result in a malfunction,
electrical leak, and/or electric
shock.
Refer to the user manual or
contact the service center for
instructions on grounding the
product.
If the water hose becomes
disconnected from the tap and
the room where the washer is
located becomes flooded, stay
out of the room and contact the
service center.
Never place gasoline, petroleum, benzene, paint
thinner, alcohol, or any other combustible substance
inside the drum or near the washer. Furthermore,
do not place an item covered or soaked in such a
substance inside or near the washer..
Do not wash items covered or soaked in an oil,
cream, or lotion used in places like massage shops
and beauty shops. (These products damage the
washer’s seals and other rubber components and
cause the washer to malfunction.)
Use a dedicated outlet rated 10A or above.
May cause a fire.
Always unplug the power cord before
cleaning the product.
May result in a fire and/or product damage.
Sparks may fly and cause an explosion, fire,
and/or burn.
Always ground the product for safety.
May result in an electric shock.
May result in an explosion and/or fire.
Warnings
Do not install the product in a location where
it will be exposed to wind and rain.
��_������_DWC-M25CW_����_���.indd 6 2021-04-09 �� 7:46:48