User's Manual

Winmate Communication Inc. User Guide Feb 12, 2001
6
6. A dialog box “WINMATE USB WIRELESS CARD Properties” shows up. This
dialog box allows you to set up the wireless options of your card. In this box you
usually need to configure the following properties: select a channel (1 through 14), the
ESSID which is used to enroll the station to an AP, the operating mode (ad-hoc or
infrastructure), rate (1, 2, 5.5, or 11 Mbps), and the WEP key. Leave the fields in
Authentication Type, Fragmentation Threshold, Preamble Type, and RTS Threshold
as they were. You do not need to configure your WLAN card at this moment. You can
change these values by the configuration utility later whenever necessary.
Click OK when you finish the above configuration. Or, you can configure your card
later by the configuration utility.