User's Manual

ACCESS POINT
48
Problem 10: I receive the following error message
:
Answer:
This error arises because you try to open up two SNMP Manager
applications. Only one SNMP Manager application can be run at one computer at any
time.
Problem 11: I have set authorized MAC addresses but then realize the addresses
I entered are wrong, and I can’t connect to the AP now.
Answer:
Your AP will only be allowed to communicate with
wireless
LANs/APs that
the MAC specifies. If you set MAC wrongly, then you have to find other wireless
LAN or AP who is authorized to communicate with the given AP. Otherwise you will
need to reset the access point. Refer to resetting the AP for further details.
Note: Authorized MAC address only restricts communication to the
wireless
LAN.
You can still communicate with the access point if you are using a
wired
LAN.