User's Manual

Rugged Computing

Users Manual Rugged Table PCs

5.1 Hardware preparation

You need preparing follow items before start to recover your tablet.

a. USB Keyboard x1

b. USB DVD-ROM Driver x1

c. USB HUB x1

●Connect a RDVD-ROM driver with RDVD inside & a keyboard to the USB hub

●Connect the USB hub to M700D’s USB port.

●Make sure the RDVD-ROM driver has been recognized by the M700D tablet.

5.2 Start to recover the system by recovery DVD

Step1.

Reboot your tablet, then press “delete key” on the keyboard to get into the

bios setup mode.

Step2.

Set your DVD-ROM driver as the first priority of the boot device.