User's Manual

Rugged Computing
23

CHAPTER 2 OPERATING TABLET PC AND HOTTAB HOTKEY UTILITY
This Chapter will guide you how to operate the Tablet PC, including start / stop the PC, and how
to use menu function including basic hardware function adjustment and the HotTab hotkey
utility software that is very easy & helpful for operating the computer.
2.2 Starting and Stopping the Tablet PC
Starting the Tablet PC You always start the tablet PC using the power button, push the
Power Button continuously by 2 seconds to turn on the Tablet PC.
Our Tablet PC will starts up with an operating system (OS) existing on the storage device like
the hard disk. The computer will automatically load the OS after you turn it on. This is normal
booting process.
NOTE: The operating system is the platform for all software application programs to run on.
The Tablet computer is recommended to use the Microsoft Windows XP embedded
operating system for default solution.
Stopping the Tablet PC
When you finish your work, you can stop the tablet PC by turning off the power or leaving
the tablet PC in Standby mode:
1 Power Off Following the shutdown process during operating system. The standard process can prevent
unsave data loss or damage your software programs.
2 Sleep (S3) Under normal operating system, Push the Power Button 0.5
second to go to sleep mode.
If you choose to stop in Standby mode, you can return to where you left off the next time you
start up the tablet PC. (See “Power Management” in Chapter 3 for more information.)