User's Manual

Chapter 1 Getting Started
10
Chargingthe Battery
Please charge the battery before using the PDA for the first time, charge the battery until the LED
indicator turns solid green. To charge the E430RM4L, use a cable or a docking with appropriate power
supply. For more information about the E430RM4L accessories, refer to Chapter 6.
LED Status
Indicator
OFF
The PDA is not charging or not properly connected
Solid Red
Low battery
Solid Orange
Charging in progress
Solid Green
Charging complete
Charging the battery using USB Cable
1. Connect the power supply output connector to the input
power port on the DC Jack cable.
2. Remove the protective rubber and connect the DC Jack
cable to the side of E430RM4L. The battery charge LED
indicates the battery charging status.
Charging the battery using Charging Dock
This docking provides input: 12V/36W DC in
1. Connect the battery charger dock to power, insert the
battery into the slot to begin charging.
2. The E430RM4L LED indicator indicates the status of the
battery charging