I771 Motherboard Mini-ITX Fan SBC w/ Intel® Core 2 Quad/Core 2 Duo Processor, VGA, LCD, Giga Ethernet, Mini-PCI and PCIE x 16 slot. USER MANUAL Version 1.
FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions： This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "a" digital device, pursuant to part 15 of the FCC rules.
Copyright Notice ALL RIGHTS RESERVED. No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer We.
Packing List Before using this Motherboard, please make sure that all the items listed below are present in your package： I771 Motherboard I771 SBC User Manual HDD SATA、IDE Cable User’s Manual & Driver CD If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronic personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Safety and Warranty 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Please read these safety instructions carefully. Please keep this user's manual for later reference. Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. Keep this equipment away from humidity.
Revision History Version Date Note 1.1 2011.04.22 BIOS、Connector 1.0 2009.01.
Contents CHAPTER 1 GENERAL INFORMATION .....................................1 1.1 1.2 INTRODUCTION ............................................................................ 1 FEATURE ..................................................................................... 1 1.3 MOTHERBOARD SPECIFICATIONS.................................................. 2 1.4 1.5 FUNCTION BLOCK ....................................................................... 3 BOARD DIMENSIONS ..................................
CHAPTER General Information 1 This chapter includes I771 Motherboard background information.
Chapter 1 1.1 General Information Introduction I771 SBC is equipped with Intel GM45 North Bridge and Intel ICH9M-E South Bridge which are designed with Intel’s mobile platform. Intel’s GM45 platform delivers the performance and high scalability cutting-edge embedded computing application. In peripheral connectivity, I771 SBC with one PCIE x 16 and PCIE x 1 slot and Mini-PCI I/O ports, One PATA connectors, and eight Hi-Speed USB connectors.
1.
1.4 Function Block Core 2 Quad / Core 2 Duo Processor Mobile CPU FSB 1066 CRT Intel GM45 LVDS DIMM x 2 DDR2 667/800 Max.
1.
CHAPTER Installations 2 This chapter provides information on how to use the jumps and connectors on I771 Motherboard.
Chapter 2 Installations 2.1 Memory Module（ （DIMM） ）Installation I771 motherboard supports dual DDR2 memory socket for a maximum total memory of 4GB in DDR2 memory type. 2.1.1 Installing and Removing Memory Modules To install the DDR2 modules, locate the memory slot on the board and perform the following steps: 1. Hold the DDR2 module so that the key of the DDR2 module align with those on the memory slot. 2.
under the “Halt On”. This allows no-keyboard operation in embedded system applications without the system halting under POST. 2.2.3 Serial COM ports Three RS-232 connectors build in the rear I/O. Fourth optional COM ports support RS-232. When an optional touch-screen is ordered with PPC, serial com port can connect to a serial or an optional touch-screen. One optional COM port supports RS232/422/485 choice through jumper setting. 2.2.
2.
2.4 Jumper Setting A pair of needle-nose pliers may be helpful when working with jumpers. If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes. Generally, you simply need a standard cable to make most connections. The jumper setting diagram is as below. If a jumper shorts pin 1 and pin 2, the setting diagram is shown as the right one.
2.4.1 JP6: Clear CMOS User must make sure the power supply to turn off the power supply before setting Clear CMOS. Users remember to setting jumper back to Normal before turning on the power supply. Default: 2 short 3. Clear CMOS Normal 1 1 2 2 3 3 Pin No. 1 Short 2 2 Short 3 Functions Clear CMOS Normal JP4 : COM1 RS232 / RS422 / RS485 Function Selector The jumper can be configured to operate COM1 in RS-232/422/485 mode. And the setting must be cooperated with the 2.4.2 settings.
Pin No. Functions 1 Short 2 COM1 RI =RI 3 Short 4 COM1 RI = +12V 5 Short 6 COM1 RI = +5V 7 Short 8 COM4 RI =RI 9 Short 10 COM4 RI = +12V 11 Short 12 COM4 RI = +5V 2.4.4 JP2: LCD Panel Voltage Select CN4 can be configured to operate in 3.3Volts / 5Volts / 12Volts mode. 3.3Volts 5Volts 12Volts 1 2 1 2 1 2 3 4 3 4 3 4 5 6 5 6 5 6 Pin No. 1 Short 2 3 Short 4 5 Short 6 2.4.5 JP3: HDD/DOM SATA2 Select Pin No.
2.5 Connectors and Pin Assignment The table below lists the function of each of the board’s connectors. Label Function Note CN4 DF13-40DP-1.25V 3x1 header, pitch 2.54mm CN3 LVDS LCD Output Connector Digital Panel Backlight Brightness Control Inverter Connecter CN14 Serial port COM2 9pin COM port IDE1 IDE Connector 44Pin IDE Conn.
2.5.1 CN4: LVDS Connector Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 SYMBOL LCDVDD LCDVDD LCDVDD GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Pin No. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 SYMBOL LVDS_ATX0LVDS_ATX0+ LVDS_ATX1LVDS_ATX1+ LVDS_ATX2LVDS_ATX2+ LVDS_ATXCLKLCDS_ATXCLK+ ATX3ATX3+ LVDS_BTX0LVDS_BTX0+ LVDS_BTX1LVDS_BTX1+ LVDS_BTX2LVDS_BTX2+ LVDS_BTXCLKLVDS_BTXCLK+ BTX3BTX3+ 2.5.2 CN6: Digital Panel Backlight Brightness Control Pin No.
2.5.3 CN3: Digital Panel Backlight Control Pin No. 1 2 3 4 5 6 7 SYMBOL +12V +12V +12V GND Black Light Control GND Black Light EN 5V 2.5.4 PSKBM1: PS2 Keyboard/Mouse Connector Pin No. 1 2 3 4 5 6 PS/2 Keyboard SYMBOL KDATA NC1 Ground VCC KBCLK NC2 I771 Motherboard User Manual Pin No.
2.5.5 D-SUB Dual Output The serial port COM1, which is option for RS232 / RS422 / RS485, is the Winbond I/O serial port. COM1 C1 Up: 9(Male) C6 V1 Down: 15(Female) V6 V11 VGA Pin No. C1 C2 C3 C4 C5 C6 C7 C8 C9 SYMBOL DCD4/485TXRXSRD4/485TXRX+ STD4/422RX+ DTR4/422RXGND NDSRA NRTSA NCTSA NRIA Pin No. V1 V2 V3 V4 V5 V6 V7 V8 V9 V10 V11 V12 V13 V14 V15 SYMBOL R G B NA GND GND GND GND VCC GND NA DDC_DATA CRT_HS CRT_VS DDC_CLK 2.5.
2.5.7 D-SUB Dual Serial Port The serial port COM3/4, RS232 only, from A1 to A9 is COM3, and B1 to B9 is COM4, which is supported by Fintek. COM4 Pin No. A1 A2 A3 A4 A5 A6 A7 A8 A9 B1 B6 A1 A6 SYMBOL FK_NDCD1 FK_NSIN1 FK_NSOUT1 FK_NDTR1 GND FK_NDSR1 FK_NRTS1 FK_NCTS1 FK_NRI1 COM3 2.5.8 AUDIO401: Audio Jack ( Pin-header ) Color Blue Green Pink C0~C4 B1~B4 A1~A4 Signal Line In Line Out Microphone In Pin-Header Line in Line out Mic in I771 Motherboard User Manual 16 Pin No.
2.5.9 IDE1: 44 pins IDE Connector 1 2 44 Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 I771 Motherboard User Manual SYMBOL RESET DD7 DD6 DD5 DD4 DD3 DD2 DD1 DD0 GND1 DREQ DIOW# DIOR# IO_RDYD DACK# IRQ DA1 DA0 DCS#1 DASP# +5V1 GND2 17 Pin No.
2.5.10 USB: USB PIN HEADER 2 1 4 3 6 5 8 7 USB1 Pin SYMBOL Pin SYMBOL 2 USBVCC 1 USBVCC 4 USB_DATA13 USB_DATA06 USB_DATA1+ 5 USB_DATA0+ 8 GND 7 GND 2.5.11 FAN1_SYS/FAN2_CPU: FAN CONNECTOR FAN1_SYS FAN2_CPU 2.5.12 PANEL1: Front Panel System Function Connector 2 4 6 8 10 Pin 2 4 6 8 10 1 3 5 7 9 SYMBOL HD_LED+ HD_LEDRT_BT1 RT_BT2 5VSB Pin 1 3 5 7 9 2.5.
2.5.14 CN11/CN12/CN13/CN2: External Power Yellow Red CN13 CN11/CN12 CN2 2.5.15 PWIN1: DC Jack ( +12V) / Input 2.5.16 ATX_PWR / Input: 12V DC Connector Pin 1 2 3 4 SYMBOL Ground Ground +12V +12V 2.5.17 : CN7: Digital I/O Connector 2 4 6 8 10 Pin 2 4 6 8 10 1 3 5 7 9 SYMBOL Vcc Out1 Out0 IN1 IN0 Pin 1 3 5 7 9 SYMBOL GND Out3 Out2 IN3 IN2 2.5.
2.5.19 : CN23: ME JTAG( Optional) CN23 is ME JTAG for Intel iAMT function. Pin 1 2 3 4 SYMBOL NC GND +1.05V +3.
CHAPTER 3 Graphic Driver Installation This chapter offers information on the chipset software Installation utility Installation of Graphic Driver Panel Resolution Setting I771 Motherboard User Manual 21
Chapter 3 Graphic Driver Installation 3.1 Graphic Driver Installation I771 Motherboard is equipped with Intel GM45 / ICH9M-E Companion Device. The Intel Graphic Drivers should be installed first, and it will enable “Video Controller (VGA compatible). Follow the instructions below to complete the installation. You will quickly complete the installation. Step.1. Insert the CD that comes with the Motherboard. Open the file document “Graphic Driver “. Step.2. Click on “winxp_14428” to execute the setup.
Step.3. Click on “Next “ to install Driver. Step.4. Click on “Next “ to install Driver.
Step.5. Click on “Yes “ to agree License. Step.7. Click on “Yes, I want to restart this computer now“ to go on.
CHAPTER 4 Chipset Driver Installation This chapter offers information on the chipset software Installation utility Installation of Chipset Driver Further information I771 Motherboard User Manual 25
Chapter 4 Chipset Driver Installation 4.1 Chipset Driver Installation Setp.1. Insert the CD that comes with the motherboard. Open the file document “Chipset Driver”. Setp.2. Click on “Setup“ to install driver.
Setp.3. Click on “Next“ to install driver. Setp.4.
Setp.5. Click on “Next“ to install driver. Step.7. Click on “Yes, I want to restart this computer now“ to go on.
CHAPTER 5 Ethernet Driver Installation This chapter offers information on the Ethernet software installation utility.
Chapter 5 5.1 Ethernet Driver Installation Installation of Ethernet Driver The Users must make sure which operating system you are using in the I771 Motherboard before installing the Ethernet drivers. Follow the steps below to complete the installation of the Intel 82574L + 82567LM LAN drivers. You will quickly complete the installation. Step.1. Insert the CD that comes with the motherboard. Open the file document “LAN Driver”. Step.2 Click on “Setup” to execute the setup.
Step.3. Click on “Next“ to install driver. Step.4. Click on “I accept the terms in the license agreement.
Setp.5. Click on “Advanced Network Services“ and go on. Setp.6. Click on “Next“ to install driver.
Setp.7. Click on “Finish“.
CHAPTER 6 Audio Driver Installation This chapter offers information on the Audio software installation utility.
Chapter 6 Audio Driver Installation 6.1 Installation of Audio Driver The users must make sure which operating system you are using in the I771 Motherboard before installing the Audio drivers. Follow the steps below to complete the installation of the VIA VT1708B Audio drivers. You will quickly complete the installation. Step.1. Insert the CD that comes with the motherboard. Open the file “Audio driver” and click on “Setup” to execute the setup.
Step.2. Click on “Next“ to install driver. Step.3.
Step.4. Click on “Next“ to install driver. Step.5. Click on “Next“ to install driver.
Step.6. Click on “Next“ to install driver. Step.7 Click on “Yes, I want to restart this computer now“ to go on.
Step.9 After restart computer, cliick on “HD ADeck “ to set up Line in/Mic in. Step.10 Select ” Analog to the Line out “ and click “ Next page” Step.11 Select ” Analog to the Line out “ and move the bar.
CHAPTER 7 Award BIOS Installation This chapter describes the different settings available in the Award BIOS that comes with the board. This chapter offers information on the Award BIOS installation utility.
Chapter 7 7.1 AMI BIOS SETUP Starting Setup Your computer comes with a hardware configuration program called BIOS Setup that allows you to view and set system parameters. The BIOS (Basic Input / Output System) is a layer of software, called ‘firmware’, that translates instructions from software (such as the operating system) into instructions that the computer hardware can understand. The BIOS settings also identify installed devices and establish special features.
The Main BIOS setup screen has two main frames. The left frame dis- plays all the options that can be configured. Grayed-out options cannot be configured; options in blue can be. The right frame displays the key leg- end. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white. Often a text message will accompany it. 7.2 System Overview Use this option to change the system time and date.
7.3 Advanced Setting CPU Configuration Press “Enter” to CPU Configuration setting. CPU configuration differs from writing an executable program. It is equivalent to setting dip switches or jumpers on a circuit board. The executing program has no way to change this configuration.
IDE/SATA Configuration The IDE Configuration menu is used to change and/or set the configuration of the IDE devices installed in the system.
Super IO Configuration Allows you to select the Serial Port base address.
Hardware Health Configuration CPU Temperature The onboard hardware monitor automatically detects and displays the CPU temperatures.
ACPI Configuration Advanced Configuration and Power Interface (ACPI) provides an open standard for unified operating system-centric device configuration and power management.
ACPI APIC Support Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI APCI table pointer is included in the RSDT pointer list. The options: [Disabled], [Enabled]. AMI OEMB table Set this value to allow the ACPI BIOS to add a pointer to an OEMB table in the Root System Description Table (RSDT) table.
AHCI Configuration AHCI mode is enabled in the BIOS where 3 settings are commonly available: IDE, AHCI, and RAID. The last two (AHCI and RAID) require a floppy disk with the driver that can be introduced into the operating system installation through F6. Otherwise, the hard disks won't be detected.
ASF Configuration Alert Standard Format The term "system manageability" represents a wide range of technologies that enable remote system access and control in both OS-present and OS-absent environments.
Intel AMT Configuration Allows you to enable or disable iAMT support. Active Management Technology (AMT) is hardware-based technology for remotely managing and securing PCs out-of-band.
Intel Robson Configuration Allows you to configure Intel Robson Tech. The technology attempts to decrease hard drive usage by moving frequently accessed data over to the flash memory. Flash memory can be accessed faster than hard drives and requires less power to operate, thereby allowing laptops to operate faster while also being more power efficient.
Intel VT-d Configuration Allows you to configure Intel VT-d Tech.
MPS Configuration I771 Motherboard User Manual 54
PCI Express Configuration The Expansion Slot Utility allows you to change the number of "lanes" available for PCIe cards to utilize.
Smbios Configuration System Management BIOS (SMBIOS) specification defines data structures (and access methods) in a BIOS which allows a user or application to store and retrieve information specifically about the computer in question.
USB Configuration Legacy USB Support Allows you to enable or disable support for USB devices on legacy operating system (OS). Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. The options: [Disabled], [Enabled], [Auto].USB 2.0 Controller Allows you to enable or disable the USB 2.0 controller. The options: [Disabled] [Enabled].
RTC Configuration Real time clock alarm is a feature that can be used to allow a computer to 'wake up' after shut down to execute tasks every day or on a certain day I771 Motherboard User Manual 58
7.4 PCI/PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/ PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices Clear NVRAM Clear NVRAM during system boot. The options: [No], [Yes]. Plug & Play O/S When set to [No], BIOS configures all the devices in the system.
PCI Latency Timer Allows you to select the value in units of PCI clocks for the PCI device latency timer register. The options: [32] [64] [96] [128] [160] [192] [224] [248]. Allocate IRQ to PCI VGA When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even if requested. The options: [No] [Yes].
Palette Snooping When set to [Enabled], the palette snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly. The options: [Disabled] [Enabled]. PCI IDE BusMaster the BIOS use PCI bus mastering for reading/writing to IDE device. The options: [Disabled], [Enabled].
OffBoard PCI/ISA IDE Card Allows you to set the PCI slot number. The options: [Auto], [PCI Slot1], [PCI Slot2], [PCI Slot 3], [PCI Slot4], [PCI Slot5], [PCI Slot6]. IRQ3,4,5,7,9,10,11,14,15 Allows you to specify IRQ that is available to be used by PCI/PnP or Legacy ISA device. The options: [Available], [Reserved].
DMA Channel 0,1,3,5,6,7 DMA Channel PCI/PMP functions. The options: [Available], [Reserved]. Reserved Memory Size Set the size of memory block to reserve for legacy ISA devices. The options: [Disabled], [16 K], [32 K], [64 K].
I771 Motherboard User Manual 64
7.5 Boot Boot Setting Configuration Quick Boot Enable this item allows the BIOS to skip some power on self test (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. The options: [Disabled], [Enabled].
Quiet Boot Allows you to display Normal POST message or OEM logo. The options: [Disabled], [Enabled]. Boot up Num-Lock Allows you to select the power-on state for the NumLock. The options: [Off], [On].
Wait for ‘F1’ If Error When set to Enabled, the system waits for the F1 key to be pressed when error occurs. The options: [Disabled], [Enabled].
Boot Device Priority Select the priority of Boot devices.
7.6 Security Select Security Setup from the I771 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protec- tion are described in this section. To access the sub menu for the following items, select the item and press : ï Change Supervisor Password ï Boot sector Virus protection: The boot sector virus protection will warn if any program tries to write to the boot sector.
7.7 Chipset This menu controls the advanced features of the onboard Northbridge and Southbridge. TMRC Mode Select TMRC Mode.
TS on DIMM Enable/Disable Thermal Sensor on DIMM. The choice: Enabled, Disabled Memory Hole In order to improve performance, certain space in memory is reserved for ISA cards. This memory must be mapped into the memory space below 16MB. The choice: Disabled, 15MB-16MB. Boots Graphic Adapter Priority Select which graphics controller to use as the primary boot device. The choice: IGD, PCI/IGD, PCI/PEG, PEG/IGD, PEG/PCI.
Video Function Configuration DVMT Mode Select Intel's Dynamic Video Memory Technology (DVMT) allows the system to dynamically allocate memory resources according to the demands of the system at any point in time. The key idea in DVMT is to improve the efficiency of the memory allocated to either system or graphics processor. It is recommended that you set this BIOS feature to DVMT Mode for maximum performance.
South Bridge Configuration USB Functions The choice: Disabled, 2 USB Ports, 4 USB Ports, 6 USB Ports, 8 USB Ports, 10 USBPorts, 12 USB Ports. USB Port Configure The choice: 6x6 USB Ports, 8x4 USB Ports. USB 2.0 Controller (Read Only) Set to [Enabled] if you need to use any USB 2.0 device in the operating system thatdoes not support or have any USB 2.0 driver installed, such as DOS and SCO Unix. GbE Controller (Read Only) This setting Enable the onboard Gigabit Ethernet controller.
GbE Wake Up From S5 This field specifies whether the system will be awakened from the S5 power savingmode when activity or input signal of onboard LAN is detected. The choice: Enabled, Disabled. HDA Controller This setting controls the High Definition Audio interface integrated in the Southbridge. The choice: Enabled, Disabled. SMBUS Controller The choice: Enabled, Disabled. SLP_S4# Min. Assertion Width The choice: 4 to 5 seconds, 3 to 4 seconds, 2 to 3 seconds, 1 to 2 seconds.
ME Subsystem Configuration BootBlock HECI Message The choice: Disabled, Enabled. HECI Message The choice: Disabled, Enabled. End Of Post S5 HECI Message The choice: Disabled, Enabled. MEME-HECI The choice: Disabled, Enabled. MEME-IDER The choice: Disabled, Enabled. MEME-KT The choice: Disabled, Enabled.
7.8 Exit This Exit menu items allow you to load the optimal or failsafe default value for the BIOS items, and save or discard your changes to the BIOS items. Discard Changes and Exit Select this option only if you do not want to save the changes that you made to the setup program. If you made changes to fields other than System Date, System time, and Password, the BIOS asks for a confirmation before exiting.
Discard Changes This option allows you to discard the selections you made and restore the previously saved values. After selecting this option, a confirmation appears. Select [OK] to discard any changes and load the previously saved values. Load Optimal Defaults This option allows you to load the optimal default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select [OK] to load optimal default values.
Load Failsafe Defaults This option allows you to load the failsafe default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select [OK] to load failsafe default values.
Note1: Digital I/O Sample Code //File of the Main.cpp //=========================================================== //This code is for test I570 Super I/O. //=========================================================== #include #include #include #include
// = 1 -> GPIO1. ucBuf = Get_W83627EHG_Reg(0x29); Set_W83627EHG_Reg(0x29,ucBuf|0x01); // Bit0 = 0 -> GPIO1 is inactive. // Bit1 = 1 -> Activate GPIO1.
} //--------------------------------------------------------------------------void Unlock_W83627EHG (void) { outportb(W83627EHG_INDEX_PORT, W83627EHG_UNLOCK); outportb(W83627EHG_INDEX_PORT, W83627EHG_UNLOCK); } //============================================================ void Lock_W83627EHG (void) { outportb(W83627EHG_INDEX_PORT, W83627EHG_LOCK); } //============================================================ void Set_W83627EHG_Reg( unsigned char REG, unsigned char DATA) { Unlock_W83627EHG(); outportb(W8
Note2: Watchdog Sample Code //File of the Watchdog.cpp //============================================================ //This Sample code is for Watchdog timer configuration //============================================================ //============================================================ #include #include #include #include
} Set_W83627_Reg(0x07,0x08);//switch to logic device 8 Set_W83627_Reg(0x30,0x01);//Activate watchdog Set_W83627_Reg(0xF5,0x06);//Select WDTO# count mode.Second Mode.
Set_W83627_Reg(0xF6,0); //Disable Watchdog timer return 0; } //--------------------------------------------------------------------------void Unlock_W83627 (void) { outportb(W83627_INDEX_PORT, W83627_UNLOCK); outportb(W83627_INDEX_PORT, W83627_UNLOCK); } //============================================================ void Lock_W83627 (void) { outportb(W83627_INDEX_PORT, W83627_LOCK); } //============================================================ void Set_W83627_Reg( unsigned char REG, unsigned char DATA)
