User manual

2U Rack Series User Manual
93
11.4 Boot
SETTING
DESCRIPTION
Setup Prompt Timeout
This item allows you to change number of seconds to wait
for setup activation key.
Bootup NumLock State
This allows you to determine the default state of the
numeric keypad. By default, the system boots up with
NumLock on wherein the function of the numeric keypad is
the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.
Quiet Boot
If this option is set to Disabled, the BIOS display normal
POST messages. If Enabled, an OEM Logo is shown instead
of POST messages.
Fast Boot
Enables/Disables boot with initialization of a minimal set of
devices required to launch active boot option. Has no effect
for BBS boot options.
GateA20 Active
UPON REQUEST – GA20 can be disabled using BIOS services.
ALWAYS – do not allow disabling GA20; this option is useful
when any RT code is executed above 1MB.
OptionROM Messages
Set display mode for Option ROM. Options are Force BIOS
and Keep Current.
INT19 Trap Response
This item allows option ROMs to trap interrupt 19
Boot Option #1、#2、#3
Selects the boot sequence of the device.