User manual

2U Rack Series User Manual
12
3.3 Memory Module (SODIMM) Installation
The IV70 Motherboard provides two 204-pin SODIMM slot. The socket supports up
to 16GB DDR3 1333/1600 SDRAM. When installing the Memory device, please follow
the steps below：
1. First follow the instruction to remove the top system cover
2. Locate the SODIMM slot on the motherboard.
3. Firmly insert the SODIMM at an angle into its slot. Align the SODIMM on the
slot such that the notch on the SODIMM matches the break on the slot.
4. Press downwards on SODIMM until the retaining clips at both ends fully snap
back in place and the SODIMM is properly seated.