User's Guide

37
Chapter 4: Operating the Device
Note:
User can download the SDK from Winmate Download center website
>> M101P >> Development Kit or check the Driver CD which is
shipped with the tablet.
4.4.7.3 RFID Output Setting
Item
Description
Select RFID
Output
Type
The default setting for built-in HF RFID Reader is to Read UID. For some applications,
user might need to read or write further block data; the drop-down menu under this
section can do this change.
Disconnect
User can tap on the Disconnect button to stop the connection with built-in HF RFID
reader.
*To recover the connection, please turn off the module from setting UI and then turn on
the module again.