User's Guide

Rugged Windows Tablet M101P

4.4.10.2 Switch via Programmable Function Buttons:

To switch between the different touchscreen modes via the programmable function buttons, make sure the

touchscreen mode switching is set to the programmable function buttons first.

1. Open HotTab utility by pressing (Menu) Button located on the

front panel, OR launching HotTab Utility application.

2. Tap on the Setting button.

3. Tap on F1 icon.

4. Tap on the Long Press icon.

5. Change the Long Press function to “Touch Mode” as shown below:

Once the touchscreen mode switching is set to the programmable function button, Long Press on “F1”

function button to cycle through the different touchscreen modes. When touchscreen mode is switched, an

icon will temporarily overlay on the lower center of the screen to indicate current touchscreen mode: