User's Guide

Rugged Windows Tablet M101P

4.5.3 Using the Physical Function Keys (Hotkeys)

The function key mapping menu option allows user to change the

physical function buttons, Fn1 and Fn2. Users can change what

application will be launched with short press or long press of keys.

To configure function key mapping, perform the following:

1. Open the Hottab utility by press the (Menu) Button located

on the front panel, OR launching the Hottab Utility application.

2. Tap on the Setting button.

3. Tap on function key icon for the corresponding key that you want

to change.

4. At top of utility, it will say “Short Press” or “Long Press” to

indicate what type of press is being configured

5. You can switch what type of press you want to configure by

tapping on the “Short Press” or “Long Press” icon at the bottom

of the utility window.

6. Pick from list of preset applications by tapping on the application

icons OR customize which application to execute using the

picker.

Using the Custom picker:

1. Tap the icon to reveal browser window

2. Navigate to the desired executable to map to function key

3. Tap on “Done” to save selection.

To map the function key to another application:

1. Tap on the icon to remove connection to the original

application, and pick again tapping on icon.

Using the physical function keys:

1. While operating the tablet, click on the physical function keys to

activate functions mapped via the setup in this section.