User's Guide

Rugged Windows Tablet M101P

4.4.12 UHF RFID Reader Module

The UHF RFID Reader is optional for M101P Tablet PC.

Note:

Download the SDK from Winmate Download center.

>> M101P >> Development Kit or check the Driver CD which is shipped with the tablet.

4.4.12.1 How to Install

1. Remove expansion port cover from the rear side of Tablet PC.

2. Remove the top two screws of the I/O cover.

3. Align the pogo pin on UHF RFID module to the expansion port of Tablet PC; screw to fix the

module on tablet.

4.4.12.2 How to Use

1. Open Hottab utility by pressing (Menu) Button located on the front panel, OR launching

Hottab Utility application.

2. Choose “Device ON/OFF” and click on “Ext. Module”, and the setting utility will show up as

below:

3. Tap on the ON button.

4. Check the status color of the ON icon is green.