User's Guide

45
Chapter 4: Operating the Device
Keyboard Wedge
Under this setting, the data scanned is sent like keyboard data.
The scanned data can be output directly to the demo area below this window, or user can also open other
utility, such as Office Word or Notepad files, for data input.
Important:
Please notice that the input method should support the scanned character.
Tap Settings button for further details settings.
Item
Description
Prefix
Type in this field to define the characters BEFORE the data scanned.
Suffix
Type in this field to define the characters AFTER the data scanned.
Append Enter
To define to append an “Enter” which is followed by the characters.
Append TAB
To define to append an“TAB” which is followed by the characters.
Regex Filter
Press on “Presets…” button, user can define how many characters to show
after the data scanned.
Replace
To define specific characters to be replaced with preferred characters
automatically. When the characters defined in Regex Substitutionis
scanned, the data will be replaced with the one filled in Replace with.
Reset to default
To remove all the set up and back to default mode.
RFID Output Setting