User's Manual

M133W User Guide
4-3
Using the Wireless LAN (Wi-Fi) feature
To use the wireless LAN(Wi-Fi) feature to connect to the network, perform the following procedure:
1. Open the HotTab utility by press the
(Menu) Button located on the front panel, OR launching the HotTab
Utility application.
2. Tap on the Device button.
3. Check the status color of the Wi-Fi icon:
Item Status Color Description
Orange Wi-Fi is enabled.
White Wi-Fi is disabled.
4. If the Wi-Fi feature is disabled (white), tap on the Wi-Fi icon to enable it (orange).
5. Click the wireless network connection status icon in the Windows notication area. A list of available wireless
networks is displayed.
6. Double-click a network to connect to it. Provide required authentication information if needed.
7. To check the connection status, observe wireless network connection status icon in the Windows notication
area. The more bars the icon shows, the better the wireless LAN connection strength is.
8. Now wireless LAN connection is setup, try connection to the network with a internet browser such as Internet
Explorer.
Note
• For the Windows 7 operating system, you also can check the Access Connections gauge, the Access
Connections status icon, or the Access Connections wireless status icon in the Windows notication
area.