User's Manual

M133W User Guide
4-7
Using the Barcode Reader feature
To enable the Barcode Reader feature, perform the following procedure:
1. Open the HotTab utility by press the
(Menu) Button located on the front panel, OR launching the HotTab
Utility application
2. Tap on the Device button.
3. Check the status color of the BarCode icon:
Item Status Color Description
Orange
Barcode Reader is enabled. Reading will need to be triggered
manually thru Fn button.
White Barcode Reader is disabled.
4. If the Barcode Reader feature is disabled (white), tap on the BarCode icon to enable it (orange).
5. Set either the Fn1 or Fn2 physical function keys to trigger the Barcode (See Using the physical function keys
section to learn how to setup the function keys).
6. Open the application where barcode reader will be displaying the scanned barcode.
7. Trigger the Barcode by pressing function keys set in the above steps.
Using the RFID Reader feature
To enable the RFID Reader feature, perform the following procedure:
1. Open the HotTab utility by press the
(Menu) Button located on the front panel, OR launching the HotTab
Utility application.
2. Tap on the Device button.
3. Check the status color of the RFID icon:
Item Status Color Description
Orange RFID Reader is enabled. Reading will occur without trigger.
White RFID Reader is disabled.
4. If the RFID Reader feature is disabled (white), tap on the RFID icon to enable it (orange).
5. Set either the Fn1 or Fn2 physical function keys to trigger the RFID Reader (See Using the physical function
keys section to learn how to setup the function keys).
6. Open the application where RFID reader will be displaying the scanned RFID tag.
7. Trigger the RFID Reader by pressing function keys set in the above steps.