User's Guide

13
13.3" Ultra-Rugged Tablet M133WK Series User Guide
3.2 Charge Your Tablet
The Tablet Computer operates either on external AC power or internal battery power for over 6
hours. It is recommended to use AC power when you start up the Tablet Computer for the first
time.
Caution Use only the AC adapter included with your Tablet Computer.
Using other AC adapters may damage the Tablet Computer and the Battery.
Attention Utilisez uniquement l'adaptateur secteur fourni avec votre
ordinateur tablette. L'utilisation d'autres adaptateurs secteur peut
endommager la tablette tactile et la batterie.
Perform the following to connect the Tablet computer to AC Power:
1. On the side of the Tablet Computer, lift the I/O protective cover by pulling on the latch
2. Plug the DC cord of the AC adapter into the Power Jack of the tablet computer.
3. Plug the AC power cord into the AC adapter.
4. Finally, plug the AC power cord into the electrical outlet.
When the AC Adapter is connected, the battery pack starts charging. The battery LED
indicator on the tablet computer will show different states. Please refer to description of the
LED indicator in the Description of Parts.
3.3 Battery Cold Swap
The Tablet Computer supports cold swap of batteries, meaning that you must replace the main
battery while tablet is running and connected to the power supply.
Perform the following to hot swap the batteries:
1. Use AC adapter to connect the Tablet Computer to the source of power.
2. Remove the battery pack.
3. Insert into the battery compartment.
4. Insert a new charged battery on the connector-pins side first, and then lower the battery
into the battery compartment.
5. Continue to hold the Battery Release Slider before battery is fully inserted.
6. Make sure the battery is completely lowered into the compartment before letting go the
Battery Release Slider. Battery should be flat against the housing once fully inserted.