Quick Start Guide
Table Of Contents
- Contents
- Chapter 1: Read Me First
- Chapter 2: Getting Started
- 2.1 Overview
- 2.2 Introduction
- 2.3 Product Features
- 2.4 Unpacking
- 2.5 Description of Parts
- 2.6 HotKey for Specific Functions
- 2.7 LED Indicators
- 2.8 First-time Operation
- 2.9 Installing Battery Pack
- 2.10 Installing Micro SD Card
- 2.11 Installing Micro SIM-Card
- 2.12 Connecting to Power Supply
- 2.13 Powering On and Off
- Chapter 3: First Time Operation
- Appendix A: Technical Specifications
Chapter 2: Getting Started
13
2.8 First-time Operation
To start using the tablet computer for the first time:
• Install the battery pack.
• Install the Micro SD card (If needed).
• Install the Micro SIM card (If equipped with 4G/ LTE or 3G function)
• Charge the Tablet Computer.
• Power on the Tablet Computer.
• Configure the settings of the t Tablet Computer.
2.9 Installing Battery Pack
To insert the standard battery pack into the Tablet Computer:
1.
Disconnect AC adapter and power cord from the Tablet Computer.
2.
Turn the Tablet Computer over, back facing up.
3.
Insert the battery on the connector-pins side first, and then lower the battery into
the battery compartment. Screw tightly on the battery to make it fully inserted.
4.
Make sure the battery is completely inserted; the battery will be flat against the
housing once fully inserted.
Place the Tablet (back facing up) and insert the battery into the battery slot.
To remove the battery pack:
1.
Power off the Tablet Computer (or turn on sleep mode). Disconnect any cords
connected to the Tablet Computer.
2.
Turn the tablet computer over, back facing up.
3.
Locate the battery and unscrew it to the “Unlocked” position.
4.
Lift the battery out.