S101TG 10.1" Rugged Windows Tablet Intel Core i3-1115G4 3.0 GHz (turbo boost up to 3.9 GHz) Intel Core i5-1135G7 @ 2.4GHz (turbo boost up to 4.2GHz, optional) User Guide Version 1.0 Document Part No. 9152101K1018 https://dc.winmate.
1 S101TG Rugged Tablet User Guide Contents Chapter 1: Read Me First .......................................................................................................................... 3 1.1 Advisory Conventions .......................................................................................................................... 3 1.2 Safety Information ............................................................................................................................... 4 1.
2 10.1" Rugged Windows Tablet S101TG User Guide 5.1.1 Changing Display Scaling (Recommended) .............................................................................. 37 5.1.2 Changing Screen Resolution .................................................................................................... 38 5.2 Replacing Battery .............................................................................................................................. 40 5.3 Using Recovery Wizard to Restore Computer .
Chapter 1: Read Me First Chapter 1: Read Me First 1.1 Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. Note: A note is used to emphasize helpful information Important: An important note indicates information that is important for you to know.
4 S101TG Rugged Tablet User Guide 1.2 Safety Information Precaution on Battery Pack Précaution avec le bloc-pile Do Not Disassemble, Modify, or Insert Sharp Objects Into the Battery Pack. Electrolyte leakage, generation of heat, ignition, or rupture may result. [FR] Ne pas démonter, modifier, ou insérer des objets pointus à l'intérieur du bloc-pile. Une fuite d'électrolyte, la génération de chaleur, l'amorçage ou la rupture peuvent être occasionnés.
5 S101TG Rugged Tablet User Guide General Product Safety Sécurité générale des produits ▪ Do not block any ventilation openings. Do not place the product against a wall or in an enclosed space, as doing so might impede the flow of cooling air. ▪ [FR] Ne pas bloquer les ouvertures de ventilation. Ne pas placer le produit contre un mur ou dans un espace clos de façon à entraver la circulation de l'air de refroidissement.
Chapter 1: Read Me First 1.3 Handling and Maintenance General Guideline Guide Général Keep the product at least 13 cm (5 inches) away from electrical appliances that generate a strong magnetic field such as TV, refrigerator, motor, or a large audio speaker. [FR] Garder le produit au moins à 13 cm (5 pouces) de distance des appareils électriques qui peuvent générer un fort champ magnétique comme une télévision, un réfrigérateur, un moteur, ou un important haut-parleur.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure Information and Statement The SAR limit of USA/Canada (FCC/IC) is 1.6 W/kg averaged over one gram of tissue. Device types: S101TG (FCC ID: PX9S101，IC: 9911A-S101) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use properly worn on the body is 0.311W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body.
Chapter 1: Read Me First 1.5 Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. 1.6 Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. 1.7 Disclaimer Winmate Inc.
9 S101TG Rugged Tablet User Guide Chapter 2: Getting Started This chapter tells you step by step how to get the Tablet Computer up and running. 2.1 Introduction Congratulations on purchasing Winmate® 10.1-inch Rugged Windows Tablet S101TG. S101TG is a rugged tablet with robust features designed to withstand industrial use while providing hightech solutions that increase productivity, improve safety, and reduce operational costs.
Chapter 2: Getting Started 2.3 Description of Parts Dimensions: 268 x 187 x 22.2 mm Front: No 1 2 3 4 Left: Item Description 10.1" Touch Display and act as one of Screen the inputs for the Tablet Computer Light Sensor To automatically adjust the screen brightness based on the surrounding light. LED Show the current status of Indicators the tablet computer: battery status and power status. Front Camera 2 Megapixel Webcam No 5 Right: Item Micro HDMI (Optional) USB 3.
11 S101TG Rugged Tablet User Guide Rear: Top: Bottom: No 12 Item Fn1 Button 13 Fn2 Button 14 Rear Camera 15 Fan 16 Speaker 17 SIM card slot 18 MicroSD Card Reader Battery 19 Description Programmable function key configured by Hottab Utility Programmable function key configured by Hottab Utility 8MP Autofocus Camera. Captures photos and videos. Cooling system No 20 21 Item Barcode Reader (Optional) Docking Connector Description Barcode Scanner for reading of 1D/2D barcode.
Chapter 2: Getting Started 2.5 Hotkey for Specific Functions Physical buttons with its dedicated functions can also be used to emulate commonly used keyboard keystrokes.
13 S101TG Rugged Tablet User Guide 2.6.2 Installing SIM card (For 4G/LTE Equipped Devices) The Tablet Computer supports 4G/LTE data connections and fits a Nano-SIM card. To install the SIM card: ❶ Remove the battery, as described in section 2.6.1 Installing Battery. ❷ Open the SIM-card slot rubber protection cover. ❸ Insert SIM-Card all the way in. Chip/contact is facing down ❹ Close the SIM-card slot rubber protection cover. ❺ Put and lock the battery back.
Chapter 2: Getting Started 2.6.3 Installing a MicroSD Card Your tablet supports up to 128GB additional storage with an optional microSD card slot. To install MicroSD Card: 1. Remove the battery, as described in section 2.6.1 Installing Battery. 2. Open microSD slot protective cover 3. Insert the microSD card into a slot with contacts facing down. 4. Press the card in to ensure that it is seated properly. 5. Close I/O protective cover. 6. Put back the battery, as described in section 2.6.
15 S101TG Rugged Tablet User Guide 2.6.5 Starting the Tablet Important: When powering on the device for the first time, please make sure there's no interruption during the Windows setting up process, for example, accidentally powering off. If it happened, please access the recovery menu by pressing Fn1 button to initiate the recovery process. Press and hold the power button for 3 seconds until the blue LED power indicator light up. Note: Do not press the power button repeatedly.
Chapter 3: Setting Up Windows for the First Time Chapter 3: Setting Up Windows for the First Time This chapter details how to setup the Windows that may be installed on the tablet for the first time. 3.1 Introduction The S101TG Tablet Computer operates on Windows 10 IoT Enterprise operating system. Caution Make sure the battery is full charged before starting the Tablet Computer for the first time with internal battery power.
17 S101TG Rugged Tablet User Guide 3. On the Here's the legal stuff screen, read through the disclosures, then tap Accept. 4. Windows will then try to connect to a network. Tap Skip this step to continue without a wireless connection, as you can then set up the network later. 5. On the Get going fast screen, click Use Express settings for the quickest set-up. If you want more information, tap Learn more, or if you would like to select your own options, click Customize settings.
Chapter 3: Setting Up Windows for the First Time 6. To create a local account, type your User name, password, and Password hint in the fields provided, then tap Next. 7. The initial setup screens are complete, and the desktop is displayed. 8. Read any introductory screens describing features of your computer, and tap Next upon completing each. You are now done with the initial setup process.
19 S101TG Rugged Tablet User Guide Chapter 4: Operating the Device This chapter describes how to operate the S101TG Tablet Computer, including camera, Hottab, barcode, WWAN, WLAN, GPS features. Note: Please download the SDK from Winmate Download Center (the QR code in the cover page) >> S101TG >> Development Kit. Please notice that the barcode reader is an optional module. Please make sure you have ordered the module before using the SDK. 4.
Chapter 4: Operating the Device Icon Description Allows users to configure short cut to access programs quickly with a few tabs. Shortcuts Camera Device ON/OFF Allows users to take a picture or record a video. Users can also adjust the setting related to the camera in this menu option. Enables/disables tablet computer's hardware functions. The configurable functions are Wi-Fi, WWAN (4G/LTE), GPS, Bluetooth, Camera, LED indicators, Barcode Reader, and GPS Antenna routing options.
21 S101TG Rugged Tablet User Guide 4.3 Using Camera This Hottab menu option allows users to take a picture or record a video. Before use, make sure the camera is on under the Device ON/OFF menu with the following scenarios. To open camera interface: 1. Launch the Hottab Utility application. 2. Tap on Device ON/OFF button to check the status of the built-in device. 3. Check the status color of the Camera icon: Item Camera Status Color Description Orange The camera is enabled.
Chapter 4: Operating the Device 4.4 Built-in Devices On/Off This section describes how to get quick access to set up built-in devices, including turning on/off RF modules and setting up barcode reader. 4.4.1 Using the Wireless LAN (Wi-Fi) To use the wireless LAN (Wi-Fi) feature to connect to the network, perform the following procedure: 1. Launch the Hottab Utility application. 2. Tap on the Device ON/OFF button. 3. Check the status color of the Wi-Fi icon: Item 4. 5. 6. 7. 8.
23 S101TG Rugged Tablet User Guide 4.4.2 Using the Wireless WAN The Tablet Computer supports data connection with 4G/LTE modules and fits a Nano SIM card. (Note: 4G/LTE feature is optional). 4.4.2.1 Installing a SIM card Caution Power off the tablet before installing the 4G/LTE module and Nano SIM card, or the tablet computer might be damaged by the incorrect installation behaviors.
Chapter 4: Operating the Device 4.4.2.2 Using Wireless WAN Feature To connect to the network using wireless WAN: 1. Launch the Hottab Utility application. 2. Tap on the Device ON/OFF button. 3. Check the status color of the WWAN icon: Item WWAN 4G/LTE Status Color Description Orange WWAN (4G/LTE) is enabled. White WWAN (4G/LTE) is disabled. 4. If the WWAN feature is disabled (white), tap on the WWAN icon to enable it (orange). 5.
25 S101TG Rugged Tablet User Guide 4.4.5 Turning On/Off LED Indicators The LED Indicators for Power and Battery status can be turned on/off from Hottab menu. To enable/disable the LED indicators: 1. Launch the Hottab Utility application. 2. Tap on the Device ON/OFF button. 3. Check the status color of the Indicator icon: Item Status Color Description Orange LED indicator is enabled. White LED indicator is disabled. Indicator 4.
Chapter 4: Operating the Device 4.4.6.1 Device Configuring and Setting 1. Click on Windows 2. Click on EZConfig-Scanning v4_IE and allow the blocked content if the browser is blocking the content. Click on the Connected Device icon and wait for the system to discover the device (Honeywell N660X). 3. and search for EZConfig-Scanning from the Start menu.
27 S101TG Rugged Tablet User Guide 4. Once Honeywell N660X is discovered please click the Configure Device button as shown.
Chapter 4: Operating the Device 4.4.6.2 Scanning mode Settings 1. Click on Device Settings under the Input/Output Settings section. 2. Select the desire scanning mode from the drop-down menu shown below. 3. After selecting a desire scanning mode, click on the Save to Device on the sidebar.
29 S101TG Rugged Tablet User Guide Scanning mode Description Manual Trigger When in manual trigger mode, the scanner scans until a bar code is read or until the trigger is released. Two modes are available, Normal and Enhanced. Normal mode offers good scan speed and the longest working ranges (depth of field). The Enhanced mode will give you the highest possible scan speed but slightly less range than Normal mode.
Chapter 4: Operating the Device 4.4.6.3 Setting the 1D/2D Barcode Scanner Symbologies The barcode scanner is shipped with the default settings shown below. If the default setting suits the usage requirement, setting symbologies is not necessary.
31 S101TG Rugged Tablet User Guide Method (2). Click on the Reset to Default button on the side as shown: ※Warning※ 1. The reset to default button will change all settings to default. 2. N660X could disconnect with the system after clicking the Reset to Default button. If the Disconnection happened, please scan the barcodes below in the following steps. Step 1. First, please scan the USB HID barcode: Step 2. Then please scan the USB Keyboard barcode: Step 3.
Chapter 4: Operating the Device 4.4.6.4 Adding a Prefix or Suffix 1. To add a refix or suffix, please click on the Data Formatting icon. 2. Click on the Editor button under the Prefix or Suffix section and create Prefix/Suffix value by typing in the block or select desire characters in the Control chars, Printable chars, and Extended ASCII.
33 S101TG Rugged Tablet User Guide 3. When you finish creating Prefix/Suffix, please click on Save to Device on the sidebar. 4. To check the functionality of Prefix/Suffix, please click on the Scan Data Window icon on the top. Then scan a barcode to verify if the Prefix/Suffix appears correctly.
Chapter 4: Operating the Device 4.4.7 Turn on/off the GPS External Antenna The vehicle dock of the S101TG Tablet PC supports an external GPS antenna through a standard SMA connector. To work with an external GPS antenna, please make sure the tablet PC is installed correctly to the vehicle dock and the vehicle dock has connected with an external GPS antenna.
35 S101TG Rugged Tablet User Guide 4.4.9 Changing Touchscreen Modes The tablet computer supports three built-in operating modes for different usage scenarios: Mode Description In Hand/Rain mode, the touchscreen rejects false inputs from liquid drops. When the liquid is removed, the touchscreen accepts touch inputs from bare fingertips.
36 4.4.9.2 Switch via Programmable Function Buttons: To switch between the different touchscreen modes via the programmable function buttons, ensure the touchscreen mode switching is set to the programmable function buttons first. 1. Launch the Hottab Utility application. 2. Tap on the Setting button. 3. Tap on Fn1 icon. 4. Tap on the Long Press icon. 5.
37 S101TG Rugged Tablet User Guide Chapter 5: Frequently Used Settings 5.1 Screen Resolution Scaling and Setting The S101TG's 1920 x 1200 high-resolution display is perfect for viewing images, videos, or other applications. However, the Windows user interface (icons, buttons, and other user interface elements) may be too small to read and operate at the default Windows settings.
Chapter 5: Frequently Used Settings 2. A "Display" Window will show up. Click on the drop-down option under the "Scale and layout" section and change the scaling option to "150% (Recommended)" or any other desired display scaling. 5.1.2 Changing Screen Resolution Alternatively, instead of changing the display scaling setting, user may choose to change the overall resolution setting to make screen elements bigger. 1.
39 S101TG Rugged Tablet User Guide 2. Click on the drop-down option next to Resolution and select the desire resolution by tapping on the scale: 3. Hit Apply. A Display Settings prompt will show up to ask the user if the applied resolution is usable. 4. If the new resolution is the desired display setting hit Keep changes and continue to next step. If the new resolution is not desirable, hit Revert and select a different resolution to change to, and start again from step 2. 5.
Chapter 5: Frequently Used Settings 5.2 Replacing Battery The S101TG Tablet supports an optional hot-swap battery design, meaning the tablet doesn't need to be powered off to replace the main battery. To support hot-swap, there is a backup battery inside the tablet that is charged together with the main battery. This battery cannot be removed and requires adequate power for the main battery hot-swapping.
41 S101TG Rugged Tablet User Guide 5.3 Using Recovery Wizard to Restore Computer S101TG Tablet Computer has a dedicated recovery partition stored on the tablet's hard drive to enable a quick one-key recovery process. This partition occupies about 11GB of the storage space and comes builtin to each S101TG Tablet Computer. Warning! Before starting the recovery process, be sure to backup all user data, as all data will be lost after the recovery process.
Chapter 5: Frequently Used Settings 5. Wait till the recovery process to complete. During the recovery process, a command prompt will show up to indicate the percent of the recovery process. 6. After the recovery is complete, please press any key to continue, and the tablet computer will shut down automatically.
43 S101TG Rugged Tablet User Guide 5.4 Docking Connector Pin Definition S101TG tablet computer supports one 19-pin docking connector at the bottom side. The pin definition is listed in the following table. 19 Pin Docking Connector Pin No. Description Pin No. 1 RF_GND 11 2 DOCK_DET# 12 3 GPS ANT 13 4 RF_GND 14 5 RF_GND 15 6 NC 16 7 NC 17 8 DETECT+ 18 9 Power 19 10 Power Description NC NC GND Power USB+ USBGND GND DETECT- 5.
Chapter 5: Frequently Used Settings 2. Tap on the Port Setting tab and click on Advanced button. 3. Tap on the drop-down list, choose the correct COM Port Number (refer to the COM Port Definition Table), and click OK. 4. Double-check Device Manager to make sure the COM Port number has been re-defined successfully, and then restart the system.
45 S101TG Rugged Tablet User Guide 5.6 Pairing with a Wireless Bluetooth Barcode Scanner The computer is affixed with a Bluetooth MAC (Media Access Control) address barcode label that enables wireless Bluetooth Barcode Scanner to establish a Bluetooth connection quickly. It is encoded with leading characters to instruct the wireless Bluetooth barcode scanner to initial Bluetooth Serial Port Profile pairing request. 5.6.
Chapter 5: Frequently Used Settings 3. Once the Bluetooth & other devices Menu appears, click More Bluetooth options under Related settings section as shown below. 4. Go to Options tab, and make sure that in the Discovery section, the computer is set to Allow Bluetooth devices to find this computer as shown below: Click OK to continue.
47 S101TG Rugged Tablet User Guide 5. In the Bluetooth Settings menu, go to COM Ports tab. COM port has to be setup for the wireless Bluetooth Barcode Scanner to communicate via the Bluetooth Serial Port Profile. Click on the Add… button. . 6. You are in Add COM Port window. Choose Incoming (device initiates the connection) and click OK.
Chapter 5: Frequently Used Settings 7. The computer will automatically assign COM Port to the Bluetooth connection. In the screenshot below, COM4 is allocated. Click OK to continue. 8. Next, the user has to configure the application to accept the scanned data from the wireless Bluetooth Barcode Scanner. The application has to be configured to accept the same COM Port that has been assigned for the Bluetooth Serial Port Profile in the previous step.
49 S101TG Rugged Tablet User Guide 5.6.2 Set up the Barcode Scanner for Bluetooth Pairing Important: The wireless Bluetooth Barcode Scanner has to be configured as a Bluetooth Serial Port Profile Master device to establish connection via Bluetooth MAC address barcode label. Please refer to the User Guide for the wireless Bluetooth Barcode Scanner you are using for paring for a more detailed instruction. Now the Barcode Scanner is ready for the pairing process to start. 5.6.
Chapter 5: Frequently Used Settings 5. In Add a Bluetooth Device window, click Next to connect the Barcode Scanner to the Computer. In order to ensure that Bluetooth Device is successfully paired to the computer, follow the steps below: 1. Locate the Bluetooth icon in the Notification Area. Select Show Bluetooth Devices. You can access this menu in the Control Panel: Windows ➔Control Panel ➔ Devices and Printers➔ Bluetooth Devices 2. Make sure your device is connected to the computer.
51 S101TG Rugged Tablet User Guide Chapter 6: Troubleshooting 6.1 Basic Troubleshooting Problem Solution The removable battery is not charging. • Make sure the AC adapter is properly connected and that the removable battery is properly inserted. Nothing appears on the screen. • The tablet computer may be in sleep mode. Press the power button to wake up the display. The brightness level may be too low. Increase brightness. • The screen suddenly turns blank and the power indicator goes off.
Chapter 6: Troubleshooting Problem Solution No sound is produced. • • Adjust the volume of the tablet computer by pressing on the volume rocker. If using an external audio device, make sure that the cable is properly connected. I cannot project the tablet computer display to another monitor through docking. • • Make sure the VGA driver is installed. Make sure the output setting selected is correct. The barcode scanner does not emit laser beam and does not seem to work.
53 S101TG Rugged Tablet User Guide Appendix Appendix A: Product Specifications S101TG Model Name Display Size 10.1 inches Resolution 1920x1200 Brightness 800 nits Contrast Ratio 800:1 (typ) Viewing Angle 85/85/85/85 Touch Projected Capacitive Multi-Touch Bonding Optical Bonding for Sunlight Viewability Viewability Anti-Glare touch treatment Intel Core i3-1115G4 3.0 GHz (turbo boost up to 3.9 GHz) Intel Core i5-1135G7 @ 2.4GHz (turbo boost up to 4.
Appendix Model Name S101TG Operating Humidity Operating Temperature Storage Temperature Environment Security Function Control 10% to 90% RH, non-condensing -20°C to 60°C (AC mode), -10°C to 50°C (Battery mode) -30°C to 70°C (-22°F to 158°F) Shock MIL-STD-810H Method 516.8 Procedure I Vibration MIL-STD-810H Method 514.8 Procedure I Drop MIL-STD-810H Method 516.8, 4 ft.
Notes
Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C www.winmate.com Copyright © 2021 Winmate Inc. All rights reserved.
