User's Manual

Windy Plus Box PC
User Manual Windy Plus
3.3 OBD Out Wake
up
a. Implement Daimler MCU Control and perform COM Port connect to COM3 then set
OBD out enable.
b. Click Get OBD Out and make sure OBD Out Wake Status=Enable。
c. Allow the system to enter the Sleep / Hibernate / Shut down Mode and un-plug the
OBD cable to wake up the Porty G3 S. Click get Event to confirm whether wake up
by OBD Out.
d. Click OBD Out settings and make sure whether the count and time information are
correct.