TO THE OWNER Congratulations! We welcome you to the exciting world of motor home travel and camping. You will find it convenient and enjoyable to have all the comforts of home and still enjoy the great outdoors wherever you choose to go. Your Itasca Meridian motor home has been carefully designed, engineered and manufactured to provide dependability as well as safety. Before sliding into the driver’s seat, take a few minutes to become familiar with operations and features.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, could result in damage mainly to equipment or property, but in some cases may also result in minor or moderate personal injury. NOTE: A ‘Note’ is not necessarily safety related but indicates a recommendation or special point of information that could assist in understanding the use or care of a feature item.
OWNER’S NAME STREET ADDRESS CITY AND STATE (OR PROVINCE IN CANADA) MOTOR HOME SERIAL NUMBER VEHICLE CHASSIS IDENTIFICATION NO. (VIN) DATE OF DELIVERY TO FIRST RETAIL PURCHASER VEHICLE MILEAGE AT TIME OF DELIVERY SELLING DEALER NAME AND ADDRESS TANK CAPACITIES Diesel Fuel Tank Freightliner Chassis ................................................................................90 gals. diesel Workhorse Chassis............................................................................... 100 gals.
2004 NEW VEHICLE LIMITED WARRANTY WINNEBAGO INDUSTRIES, INC. WARRANTY COVERAGE TO OWNER Winnebago Industries, Inc. of Forest City, Iowa warrants each new Winnebago Industries motor home to the owner for use in the U.S.A. and Canada as follows: WARRANTY PERIOD The Warranty Period for all coverages begins on the date the vehicle is delivered to the first retail purchaser or first placed in service as a demonstrator or company vehicle.
WINNEBAGO INDUSTRIES’ RESPONSIBILITY Any part of the vehicle subject to warranty which is found to be defective in material or workmanship, will be repaired or replaced at Winnebago Industries’ option upon notice of the defect without charge to the customer for parts or labor. While any Winnebago Industries motor home dealer can perform warranty service, we recommend you return to the dealership that sold you your vehicle.
TABLE OF CONTENTS INTRODUCTION About This Manual ....................................... 0- 1 Freightliner Chassis Operating Guide........... 0- 1 Diesel Engine Manual................................... 0- 1 Owner’s InfoCase ......................................... 0- 2 Options and Equipment ................................ 0- 2 Before Driving .............................................. 0- 2 Service and Assistance.................................. 0- 2 Warranty ..........................................
TABLE OF CONTENTS SECTION 5: LP GAS SYSTEM LP Gas Supply .............................................. 5- 1 Safe Use of the LP Gas System .................... 5- 1 How LP Gas Works ...................................... 5- 1 Selecting LP Fuel Types ............................... 5- 2 Air in the LP Gas Tank ................................. 5- 3 Regulator....................................................... 5- 4 LP Gas Leaks ................................................ 5- 4 Winter Use of LP Gas .....
TABLE OF CONTENTS SECTION 10: STORING YOUR MOTOR HOME Preparing Vehicle for Storage..................... 10- 1 Cold Weather Storage Procedure (Winterizing).......................................... 10- 1 RV Antifreeze Water Line Winterization Systems .................................................. 10- 4 Removal from Storage ................................
INTRODUCTION Congratulations on the purchase of your new Itasca Meridian motor home, which has been carefully designed, engineered and quality built by Winnebago Industries, Inc. ABOUT THIS MANUAL Please read this operator’s manual completely to understand how everything in your coach works before taking it on its “maiden voyage.” This manual is a guide to safe operation of the features, equipment and controls in this coach.
INTRODUCTION OWNER’S INFOCASE Your InfoCase contains information supplied by manufacturers of individual appliances and equipment installed in your motor home. Consult this information regarding the operation and care of appliances, accessories and special equipment. OPTIONS AND EQUIPMENT Some equipment described in this manual may not apply to your coach.
INTRODUCTION The presence of alcohol in significant levels in the blood increases the probability that the driver will be involved in an accident. REPORTING SAFETY DEFECTS If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Winnebago Industries, Inc.
INTRODUCTION VEHICLE CERTIFICATION LABEL This label contains vehicle identification and other important reference information. The vehicle certification label is located on the sidewall to the left of the steering wheel, or on the driver’s door. Never remove or destroy this label. MANUFACTURED BY INCOMPLETE VEHICLE MANUFACTURED BY MOTOR CORP.
SECTION 1 SAFETY PRECAUTIONS About Safety Messages Used in This Manual Throughout this manual, certain items are labeled Note, Caution, Warning or Danger. These terms alert you to precautions that may involved damage to your vehicle or a risk to your personal safety. Read and follow them carefully. This SAFETY ALERT SYMBOL is used to draw your attention to issues which could involved potential personal injury.
SECTION 1 SAFETY PRECAUTIONS should also be done before beginning a vacation or any extended trip. · Avoid inhaling exhaust gases produced by burned gasoline, diesel fuel or LP gas in items such as the range, chassis engine, generator engine, refrigerator, furnace and water heater. They contain carbon monoxide, which is an odorless, colorless and poisonous gas. · Do not bring or store LP gas containers, gasoline or other flammable liquids inside the vehicle because a fire or explosion may result.
SECTION 1 SAFETY PRECAUTIONS · The following warning label is located in the cooking area to remind you to provide an adequate supply of fresh air for combustion. WARNING IT IS NOT SAFE TO USE COOKING APPLIANCES FOR COMFORT HEATING Cooking appliances need fresh air for safe operation. Before operation 1. Open overhead vent or turn on exhaust fan. 2. Open window LP GAS ALARM Your coach is equipped with an LP gas detector which sounds an alarm if an unsafe amount of LP gas is present inside the coach.
SECTION 1 SAFETY PRECAUTIONS If the coach batteries become extremely drained, an amber light on the face of the alarm will come on and in some cases the LP alarm may begin to sound on its own. This condition typically occurs only during storage situations when battery charge is not being restored by the converter or solar charger. WARNING Never use an open flame to test for gas leaks. When testing for gas line leaks with a soapy water solution, DO NOT use a detergent containing ammonia or chlorine.
SECTION 1 SAFETY PRECAUTIONS NOTE: Your motor home’s load capacity is designated by weight, not by volume, so you cannot necessarily use all available space when loading your motor home. IMPORTANT To aid in dissipation, ventilate the vehicle by opening all windows and circulating the air with a fan. CARBON MONOXIDE WARNING MAINTENANCE · · WARNING Do not remove the radiator cap while engine and radiator are still hot. Always check coolant level visually at the see-through coolant reservoir.
SECTION 1 SAFETY PRECAUTIONS 1. Set fan to medium or high speed and vent control to air. 2. On vehicles equipped with air conditioning, set fan to medium or high speed and set control to obtain maximum vent air. Rear windows should be closed while driving to avoid drawing dangerous exhaust gases into the vehicle. CARBON MONOXIDE ALARM Your coach is equipped with a carbon monoxide (CO) alarm, located on the ceiling in the bedroom area. · · Battery operation provides protection 100% of the time.
SECTION 1 SAFETY PRECAUTIONS releasing these two latches and then pushing outward on the lower part of the window. We recommend that you become thoroughly familiar with the operating instructions displayed on the side of the fire extinguisher or in the information supplied in your Owner’s InfoCase. We also recommend that you inspect the fire extinguisher for proper charge at least once a month in accordance with National Fire Protection Association (NFPA) recommendations as stated on the label.
SECTION 1 SAFETY PRECAUTIONS smoke in a careful, fire-safe manner into your smoke alarm. Press to Test 2. Your smoke alarm will not work without power. Never remove the battery to quiet the alarm. When your smoke alarm “beeps” about once a minute the battery is weak. Install a new battery immediately. Be sure to use only batteries specified in manual or on unit. Test unit after installing a new battery. 3. Clean and vacuum the openings on your smoke alarm once a month.
SECTION 2 DRIVING YOUR MOTORHOME (See also Safety Precautions, Section 1 of this manual.) NOTE: See your Freightliner chassis operator's manual for information on starting the engine, operating the transmission, steering column controls, descriptions of instrument gauges, and other chassis related information. Some items described in this section may be optional or unavailable on your coach.
SECTION 2 DRIVING YOUR MOTOR HOME 1. Be sure that you adjust the interior and exterior rear view mirrors to your driving preference. 2. Adjust the driver's seat for proper distance from foot pedals and steering wheel to allow for safety and ease in controlling your vehicle. 3. Place front seats in the forward facing position. 4. Be sure to fasten all safety belts to fit you comfortably, but tight enough to obtain the full safety of the belts. 5. Make sure all doors are completely shut and locked.
SECTION 2 DRIVING YOUR MOTOR HOME See also “Engine Block Heater” elsewhere in this section. Cold Weather Starting: Please note the following cold weather starting precautions. These labels are also located in appropriate areas of the coach. Failure to follow these precautions could cause serious damage to your diesel engine. To Use the Engine Heater With the shoreline cord plugged into a shoreline hookup, turn on the engine heater power switch.
SECTION 2 DRIVING YOUR MOTOR HOME left of the ignition switch. Push the knob in to release the brakes. Exhaust Brake Switch Parking Brake Knob Use the parking brakes whenever the vehicle is parked. Never try to drive the vehicle with the park brake applied. This can cause excessive wear on the brakes and may damage the transmission. NOTE: It is normal to hear an occasional burst of air pressure from the rear of the vehicle. This is an automatic moisture purging feature of the air brake system.
SECTION 2 DRIVING YOUR MOTOR HOME To lock the door from inside, rotate the lock levers as indicated. The deadbolt lock is for added security and should be used as a security night lock. Door Handle Lock Hazard Light Switch Pull On/Push Off ENTRANCE DOOR LOCK AND HANDLE The entrance door may be opened from outside the vehicle by pulling the door handle outward. To open the door from inside, pull outward on the door handle.
SECTION 2 DRIVING YOUR MOTOR HOME Lock: When you leave the coach, simply press the “lock” button on the remote transmitter attached to your key ring. The entrance door will lock. Your parking lights will flash once to tell you that the door has locked. 4. Remove old battery and insert new battery in same direction (+/-) as old battery. 5. Close case and replace case screws. The compact 12 volt battery used in these units is available at most electronic shops and camera shops.
SECTION 2 DRIVING YOUR MOTOR HOME door is opened or closed. This is done by means of a magnetic door switch attached to the lower hinged edge of the screen door section of the entrance doors. The steps will extend when the screen door is opened, and retract when the screen door is closed. With the power switch in the Off position the step can be kept in the extended or retracted position as described below.
SECTION 2 DRIVING YOUR MOTOR HOME CAUTION Stay clear of entrance step area when stepwell is being extended or retracted. When entering or exiting, loose clothing may catch on components of the mechanism. Personal injury and/ or property damage may result. Select the mirror to be adjusted by pushing the switch in the middle of the control to the right or left. Then press the arrow buttons as necessary to obtain the best view.
SECTION 2 DRIVING YOUR MOTOR HOME SONY REARVIEW MONITOR SYSTEM Lock Screws Passenger Side Mirror Loosen screws to make coarse adjustments More Info To read more about power mirrors, see the mirror manufacturer’s information in your Owner InfoCase. Power Sunvisors The powered sunvisors are controlled by switches on the driver and passenger armrest panels. The driver side contains switches for both sides to allow driver control. The passenger side has a switch only for the passenger side visor.
SECTION 2 DRIVING YOUR MOTOR HOME ELECTRONIC COMPASS & OUTSIDE THERMOMETER COMPASS OPERATION The compass has two (2) buttons - MODE and °F/°C - which are used to change the unit between the various operating modes. Ignition On Operation: 1. Unit displays outside temperature and compass heading. 2. Press the °F/°C button to toggle between displaying °C and °F. 3. If the unit has been properly calibrated, the heading will remain ‘on’ continuously.
SECTION 2 DRIVING YOUR MOTOR HOME FastCAL™ routine, it will start FastCAL™ over the next time it is powered up. Turning ignition power on and off will not affect the FastCAL™ routine. After the FastCAL™ routine is completed the compass switches into the SmartCAL™ mode. SmartCAL™ is an ongoing, fine tuning of the calibration settings.
SECTION 2 DRIVING YOUR MOTOR HOME trolled by a hand-held remote control unit included in your Owner InfoCase. This convenient features allow you to operate the spotlight without having to be in the driver seat. You can operate it from anywhere inside that coach, and even while outside the coach for a limited distance. DRIVER SEAT To Recline Seat: Lift recliner release lever. Lever is located on lower left side of seat.
SECTION 2 DRIVING YOUR MOTOR HOME • • • • • • • • • • • • Put the left armrest down. Swivel the seat to the right until it just contacts the steering wheel, then slide the seat forward all the way. Lift the recliner lever and let the seat back tilt forward to clear the steering wheel. Swivel the seat the rest of the way to face the living area. Position the tilt wheel down and the column all the way in to provide maximum clearance to recline the seat.
SECTION 2 DRIVING YOUR MOTOR HOME To Fasten: Be sure belt is not twisted. Grasp each part of the belt assembly and push tongue into buckle. Adjust to a snug fit by pulling the loose end away from the tongue. To Release: Press button in center of buckle and slide tongue out of buckle. WARNING Pull Outward to Slide Pull Outward To Swivel Snug and low belt positions are essential.
SECTION 2 DRIVING YOUR MOTOR HOME NOTE: The shoulder belt height can be adjusted to provide the most comfortable position for each individual person’s size. To adjust shoulder belt height, press the lever down, select the desired position and release the lever. A ratcheting mechanism will allow the belt to be pushed upward but not pulled downward. SEAT BELT CARE AND CLEANING • Be careful not to damage the belt webbing and hardware. Take care not to pinch them in the seat or doors.
SECTION 2 DRIVING YOUR MOTOR HOME niently so that you are able to install it correctly each time it is used. 3. Be certain that it is appropriate for the child's height, weight and development. The instructions and/or the regulation label attached to the restraint typically provides this information. 4. Review the instructions for installation and use of the restraint. Be sure that you understand them fully and can install the restraint properly and safely in your vehicle.
SECTION 2 DRIVING YOUR MOTOR HOME INSTRUMENT PANEL 1. Windshield Wipe/Wash Switch 2. Battery Boost Switch 3. Fog Lamp Switch 4. Headlight Switch 5. Panel Dimmer* 6. Instrument Panel* 7. Trip Meter Reset Switch 8. Air Horn Activation Switch 9. Windshield Fan Switch 10. Radio Power Switch 11. Aux. Battery Disconnect Switch 12. Aux. Generator Start/Stop Switch 13. Rearview (Backup) Monitor** 14. Electronic Compass/Thermometer** 15. Automotive Climate Controls** 16. RV RadioTM Cassette/CD Player** 17.
SECTION 2 DRIVING YOUR MOTOR HOME MULTI-FUNCTION SIGNAL LEVER The multi-function signal lever controls the turn signals, high/low beam changing, and the electronic speed control (cruise). See your chassis operating guide for complete operating information. Pull to Tilt Push to Telescope To Adjust Telescoping Column: Push the lever toward the dash. Push or pull the steering wheel to slide the steering column in or out to the desired length. Release the lever to lock the column into position.
SECTION 2 DRIVING YOUR MOTOR HOME WINDSHIELD WASH/WIPE SWITCH Wash: Press the control knob to pump washer solution onto the windshield. The wiper will also begin operating. The wiper will continue for up to 5 wipes after you release the washer knob. Fan Speed Control Temp Control Mode Selector 1. Front Heater Fan Switch 2. Temperature Control Knob 3. Mode Selection Knob HEATING OFF HI LOW DELAY Wiper: Rotate the outer knob pointer to the desired setting - Delay, Low or Hi.
SECTION 2 DRIVING YOUR MOTOR HOME VENTILATION ellite dish are lowered completely into the roof cradle for travel storage. A. To vent outside air into the vehicle when neither heating or cooling is required. 1. Turn the mode selection knob to vent. 2. Turn the temperature control knob all the way to the left to the COOL (blue) zone. 3. Adjust the fan speed for desired volume. AIR CONDITIONING A. For maximum cooling. 1. Turn the mode selection knob to MAX A/C. 2.
SECTION 2 DRIVING YOUR MOTOR HOME tons and using this full-featured radio/audio system. Radio Power Switch The radio power switch lets you connect the dash radio to the coach batteries with the ignition switch turned off for listening while parked. This prevents accidental draining of the chassis (starting) battery during prolonged operation of the radio.
SECTION 2 DRIVING YOUR MOTOR HOME Press and hold while turning ignition key for emergency starting power if engine battery is dead. AUXILIARY BATTERY (Aux. Batt) SWITCH The AUX BATT switch disconnects the auxiliary (coach) batteries from the 12-volt system of your coach to avoid long-term battery drain by electrical items that are hooked directly to the coach batteries. Always leave this switch ON except during storage periods.
SECTION 2 DRIVING YOUR MOTOR HOME Leveling System Control Panel CAUTION The CB radio could become damaged if CB antenna SWR is not adjusted before operating CB radio. HYDRAULIC COACH LEVELING SYSTEM Your coach is equipped with a 4-point HWH hydraulic leveling system. This leveling system is designed to diminish problems in selecting a parking site, making “set up” easier and faster for you. See the HWH Operator Manual in your Owner’s InfoCase for complete operating instructions.
SECTION 2 DRIVING YOUR MOTOR HOME CAUTION Do not try to drive vehicle unless ‘TRAVEL’ light is glowing with ignition switch on. Do not try to drive the vehicle until the air suspension system has built up sufficient pressure if you have used the coach leveling system or have used the DUMP button to manually exhaust the air suspension system. WARNING Keep all people clear of the coach while the leveling system is operating.
SECTION 2 DRIVING YOUR MOTOR HOME Your coach is equipped with a galley/living room slideout extension to enlarge your living area at the push of a button. The slideout room extends and retracts by hydraulic mechanisms with an electronic control system. The lounge slideout switch is located on the lower right dash bezel. Travel Straps (Front Slideout Room) The Travel Straps must be released before attempting to extend the room or damage to the coach will result.
SECTION 2 DRIVING YOUR MOTOR HOME • Level the coach. • Set the Parking Brake. An interlock relay system will then provide power to the slideout control switches. • Release travel straps (galley). • Press slide-out switch and hold until room is fully extended, then release switch. • The front slideout control switch is located on the lower right dash bezel, above the ignition key and park brake knob.
SECTION 2 DRIVING YOUR MOTOR HOME If Slideout Room Will Not Operate (Troubleshooting) • The chassis battery may be low on charge. Press the Aux. Start switch on the dash to the momentary (MOM) position while pressing the slide-out control switch. This momentarily connects the coach batteries to assist in retracting the room. • One of the fuses may be blown. Fuses are located on the interior firewall beneath the dash, beneath the instrument panel dash pod, and inside the leveling control pad housing.
SECTION 2 DRIVING YOUR MOTOR HOME Use provided 1/4” nut driver to turn nut counterclockwise 4 turns only. • Attach the hook end of the winch belt through the looped end of seat belt material fastened to the floor of the slideout room. • Be sure the winch ratchet pawl is in the locking position (against the gear teeth) before cranking. Slideout Room Solenoid Valve • Do not open any of the four large T-handled valves on the opposite end of the pump. These regulate the coach leveling jacks.
SECTION 2 DRIVING YOUR MOTOR HOME Step 2B - (For Models 36G & 39K with Flat Floor Slideout) • • A wheel (lug) nut wrench is used to crank the room inward. You may use the wrench supplied wth the coach (in one of the storage compartments) or any type of lug wrench of the same nut size. Crank-in bolts are located on the outboard mounting plates of the slideout room as shown. These plates are located at both ends of the room inside the StoreMoreTM compartment doors.
SECTION 2 DRIVING YOUR MOTOR HOME If an apparent cause is not found, call the number on your Winnebago Industries Premium Roadside Assistance card. They will dispatch a service vehicle to your location to push the room extension in so the coach may be driven to your dealer for service of the slideout control system. NOTE: The following information may be needed by the service operator to prepare the bedroom slideout for the “push-in” procedure.
SECTION 2 DRIVING YOUR MOTOR HOME voir, or between the two marks on the breather cap dipstick shown in the following illustration. *NOTE: If you do not know the model number of your coach, check the Vehicle Certification Label on the wall panel to the left of the drivers seat. See page 0-4 for instructions on reading the model number. NOTE: Overfilling the tank can cause leakage of oil through the breather cap. HYDRAULIC FLUID RECOMMENDATION HWH Specialty Hydraulic Oil is recommended.
SECTION 3 IN CASE OF DRIVING EMERGENCY HAZARD WARNING FLASHER The hazard warning flasher provides additional safety when the vehicle must be stopped on the side of the roadway and presents a possible hazard to other motorists. When the flasher is on, it serves as a warning to the other drivers to approach and overtake your vehicle with caution. WARNING Operating the hazard warning flasher system while moving on the highway is illegal.
SECTION 3 IN CASE OF DRIVING EMERGENCY NOTE: Know and obey all state and local towing regulations. Tow at reduced speed. JUMP STARTING If your coach will not start from the automotive batteries, try using the aux. start switch to divert power from the coach batteries to the starter. (See Aux. Start Switch on page 2-14.) If you wish to try jump starting the engine using another vehicle or booster system, here are basic guidelines for connecting jumper cables to automotive electrical systems.
SECTION 3 IN CASE OF DRIVING EMERGENCY 9. Reverse the above sequence EXACTLY when removing the jumper cables. Start by removing the cable from the ground location on the engine first, then continue in reverse sequence. WARNING Do not attempt to push-start this vehicle. Damage to the transmission or other parts of the vehicle could occur. CONNECTING A BATTERY CHARGER To connect a battery charger, first make sure the engine is switched off. Disconnect the negative (-) lead from the battery.
SECTION 3 IN CASE OF DRIVING EMERGENCY necessary. Make sure there are no broken belts, pulleys or hoses before adding any coolant to the coolant reservoir. For further information about overheating, consult your Freightliner chassis operating guide and Caterpillar Diesel Engine manual.
SECTION 4 TRAVELING WITH YOUR MOTORHOME (See also SAFETY PRECAUTIONS, Section 1 of this manual.) LOADING THE VEHICLE NOTE: Your motor home’s load capacity is designated by weight, not by volume, so you cannot necessarily use all available space when loading your motor home. When loading the vehicle, distribute the cargo load equally so that you do not exceed either the Front or Rear Gross Axle Weight Rating (GAWR) or the Gross Vehicle Weight Rating (GVWR).
SECTION 4 TRAVELING WITH YOUR MOTOR HOME grain storage elevators have scales available. If you don’t know of a truck scale in your area, look in the Yellow Pages for entries such as Grain Elevators, Scales-Public, Truck Stops, Weigh Stations, etc. If you cannot locate a scale in your area, call your state DOT and ask for recommendations. Most scales charge a nominal fee for weighing a vehicle.
SECTION 4 TRAVELING WITH YOUR MOTOR HOME Weighing Left Rear ‘Corner’ After the rear wheel set has been weighed, turn the coach around and repeat this process for the other side. The load on each wheel or dual-wheel set should not exceed one-half of the corresponding GAWR. For example, if the GAWR for the rear axle is 12,000 lbs., then the load on each rear dual set (left rear duals or right rear duals) should not exceed 6,000 lbs.
SECTION 4 TRAVELING WITH YOUR MOTOR HOME the Vehicle” and “Weighing Your Loaded Vehicle” for explanation of these weight ratings. Always be aware of the loaded weight of your coach and the weight of any towed vehicle. Because of individual vehicle use and loading habits, we recommend weighing the vehicle while fully loaded to avoid exceeding any of the listed Gross Weight Ratings. See “Vehicle Certification Label” on page 0-4 for information on gross weight ratings.
SECTION 4 TRAVELING WITH YOUR MOTOR HOME - TV Antenna/Satellite Dish - Make certain the antenna and dish are lowered and seated in their support cradles. - Loose Items Inside the Motor Home - Store or secure items. - Pilot Lights - Make sure all pilots are off. - Fuel Tanks - Check level. - Water Tank - Fill with fresh water. - Exterior Door and Step - Make sure doors are closed, locked and step retracted. - Seats - Adjusted for comfortable position and locked in place.
SECTION 4 TRAVELING WITH YOUR MOTOR HOME weather. Whether you travel the high mountain terrain, the lower deserts and flatland or the plains of the midwest, the weather is always with you and subject to change, sometimes with little or no warning. However, adequate warnings are normally broadcast over local radio and TV stations. Motor home travelers and campers often seek secluded areas for weekend recreation or extended summer vacations.
SECTION 4 TRAVELING WITH YOUR MOTOR HOME · Use care when passing other vehicles. Your motor home is a longer vehicle than a car, and you may have a more difficult time knowing when to pull back into your lane. If possible, have another person in the coach help you watch while maneuvering your motor home in traffic. CAUTION Observe the engine temperature gauge more frequently than normal.
SECTION 4 TRAVELING WITH YOUR MOTOR HOME Hydraulic Leveling System See Coach Leveling Systems on page 2-21 for operating information. EFFECTS OF PROLONGED OCCUPANCY Your motor home was designed primarily for recreational use and short term occupancy. If you expect to occupy your coach for an extended period, be prepared to deal with condensation and humid conditions that may be encountered.
SECTION 5 LP GAS SYSTEM (See also Safety Precautions, Section 1 of this manual.) at each tank filling. Also inspect before and after each trip, and any time trouble is suspected. · Turn the LP supply valve off when not using the LP gas system. · Never use a wrench to tighten the tank supply valve. It is designed to close leak-tight by hand. If a wrench is required to completely close the valve, it is defective and must be replaced.
SECTION 5 LP GAS SYSTEM SELECTING LP FUEL TYPES We recommend using straight propane in your LP tank. Propane gas is commonly available at all LP gas outlets in the U.S. and Canada (According to the National LP Gas Association, LP gas outlets in the United States do not offer any other type of liquefied petroleum gas than propane to the general public.) Check local phone directory yellow pages for locations of local LP gas refilling stations or bulk dealerships. NOTE: If you travel outside the U.S.
SECTION 5 LP GAS SYSTEM NOTE: The LP tank is equipped with an automatic 80% stop-fill device. LP Gas Tank Capacity: .....................................*31 gal. (39 gal. w.c.) * LP Gas tank capacity shown is the usable “full” LP gas capacity, which is 80% of the tank manufacturer’s listed water capacity (w.c. shown in parenthesis). An LP tank must have at least 20% of tank volume free to allow for expansion and proper vaporization of the liquid fuel.
SECTION 5 LP GAS SYSTEM REGULATOR The pressure regulator is protected from the elements by a plastic cover which should be left in place at all times. Only your dealer or a qualified LP gas service should remove the regulator cover for adjustments. WARNING the temperature becomes colder, it is increasingly harder for the liquid LP gas to vaporize. At the same time, the demand for LP to produce heat increases to the point where the system cannot maintain production.
SECTION 5 LP GAS SYSTEM LP GAS ALARM - See page 1-2. WINTER USE OF LP GAS Due to vaporization characteristics of LP gas, it is important that the winter camper knows how to most efficiently use the LP system. The vaporization rate of LP gas decreases in a direct relationship to a decrease in temperature. Propane will convert to a usable gas at temperatures down to -44°F. For this reason, propane is a popular heating fuel in cold climates.
SECTION 6 ELECTRICAL SYSTEMS (See also Safety Precautions, Section 1 of this manual.) Your coach is equipped with an electrical system consisting of two separate voltages; a 12-volt DC system and a 110-volt AC system. The 12volt system consists of two internal power sources, while the 110-volt system is operated from an outside power source, or from the optional 110-volt generator or 110-volt inverter system.
SECTION 6 ELECTRICAL SYSTEMS CONNECTING THE SHORELINE To connect to an external source, remove the cord from the storage compartment and plug it into a suitable 50-amp power receptacle to provide external power to the coach and converter/ charger system. NOTE: Some parks do not have 50-amp service available, so you will need to connect to a standard 30-amp service pole using an adaptor. 2. Swivel the cover section aside to reveal cord notch. 30 Amp Receptacle 50 Amp.
SECTION 6 ELECTRICAL SYSTEMS Park Fuses or Breakers Most campgrounds are equipped with a fuse or circuit breaker at the receptacle. This protects the park’s wiring, as well as the power cord on your vehicle, from electrical damage. If electrical power fails, contact the park attendants and have them check the fuse or breaker for your supply receptacle. After disconnecting the power cord, neatly replace it in the storage compartment.
SECTION 6 ELECTRICAL SYSTEMS AC input source from overloads. See the Heart Interface operation information for complete explanation and instructions on this system. House 12V Breakers (below refrigerator) Inverter Charger Unit Location CAUTION Do not store items too closely around the inverter unit in the storage compartment. The inverter generates heat while operating and needs unrestricted airflow for proper cooling.
SECTION 6 ELECTRICAL SYSTEMS for an extended period of time or by obstruction of ventilation to unit. NOTE: 12-volt lights and motors will automatically draw from battery power in this event. 110-Volt House Circuit Breakers (at foot of bed) CHARGING SECTION The house batteries are automatically charged while 110-volt external power is connected. The charger will automatically “sense” the condition of the RV battery. If it is below “full charge”, the Charging Section will start charging the battery.
SECTION 6 ELECTRICAL SYSTEMS If the GFCI keeps tripping, have the electrical system checked and repaired if necessary before using again. The GFCI outlets are located in the bath and galley areas of the vehicle. AUXILIARY 110-VOLT GENERATOR Consult the generator manufacturer’s information provided in your Owner InfoCase for instructions on operation, troubleshooting and maintenance. This coach may be equipped with one of several models of generators.
SECTION 6 ELECTRICAL SYSTEMS switches in two locations inside the coach; in addition to the switch on the generator itself: · · Instrument Panel Systems Monitor Panel (One Place) The generator starter circuit does not rely on the automotive battery, so the switch will operate whether the ignition switch is on or off. Basic Generator Operation: • See generator manufacturer’s operating information for specific instructions. • Reduce all electrical loads. (Shut off lights, fans, appliances, etc.
SECTION 6 ELECTRICAL SYSTEMS OPERATION WARNINGS AND CAUTIONS WARNING The exhaust of all internal combustion engines contains carbon monoxide (CO). This poisonous gas is colorless, odorless, tasteless, and lighter than air. The exhaust systems of both your motor home engine and your generator engine have been installed with your safety in mind. However, certain precautions must be taken when using them to protect yourself from conditions beyond the control of the manufacturer. 1.
SECTION 6 ELECTRICAL SYSTEMS Auto Chassis 12-Volt Breaker Panel “Hood” Compartment SOLAR CHARGER PANEL The 10-watt roof-mounted solar charger panel uses the sun to help keep your house batteries charged. A charge indicator light is provided on the One Place panel to show you when the solar panel is actively charging the house batteries. The red light will glow when the solar panel is charging the coach batteries. The greater the rate of charge, the brighter the light.
SECTION 6 ELECTRICAL SYSTEMS or sulfating, and prevents the battery from either releasing or accepting a charge. If this condition occurs, the battery must be replaced. If a battery does not contain at least 80% charge during freezing temperatures, the electrolyte can freeze and crack the battery case.
SECTION 6 ELECTRICAL SYSTEMS · Clean and tighten battery terminals and have the specific gravity checked at least once a year. · Every two months, or more often in hot weather, check the battery fluid level. Fill to approximately 3/8 inch above the plates. DO NOT OVERFILL. If fluid is added during freezing weather, the motor home should be driven several miles to mix water and electrolyte to prevent freezing. · Fluid level check may be omitted if equipped with maintenance-free batteries.
SECTION 7 PLUMBING SYSTEMS FRESH WATER SYSTEM Fresh Water Tank.......... 86 gal. The fresh water system provides water to the galley sink, shower, bathroom lavatory, toilet and water heater. Water may be supplied by either of two sources: - a water tank located within the motor home, or - any external water source to which the motor home may be connected, known as “city water”.
SECTION 7 PLUMBING SYSTEMS connect in-line between the supply hose and the city water input on the coach. We recommend a regulator that controls water pressure to 40 psi maximum. NOTE: Always keep the tank fill valve closed unless you are filling the tank. If this valve is open while using the city water, the water will keep flowing into the tank and out the gravity fill tube.
SECTION 7 PLUMBING SYSTEMS While any pump switch is in the “ON” position, the pump will automatically supply water pressure as it is needed. It is recommended that the pump switch be turned off whenever you are away from the vehicle or not using the water system. A slow leak in a faucet could drain the water system and discharge the coach battery. NOTE: The water pump does not need to be switched on while the coach is connected to a city water hookup. See “External Water Supply” on the following page.
SECTION 7 PLUMBING SYSTEMS WATER PURIFIER (FILTER) SYSTEM The water purifier system uses a flowthrough activated carbon filter that removes chlorine and other impurities, resulting in clean, taste-free and odorless drinking water. City Water Connector 3. Turn water tank fill valve to CITY FILL position. 4. Turn on the external water source. When connected to an outside source of water, the water bypasses the demand pump and storage tank and supplies pressure directly to individual faucets and toilet.
SECTION 7 PLUMBING SYSTEMS WASTE WATER SYSTEM (HOLDING TANKS) · · Insert a new water filter cartridge up into the filter head as far as possible and turn it clockwise a quarter turn. Lower valve handle to lock filter and restore water flow. See “Winterizing the Water Purifier System” in Section 10. EXTERIOR SHOWER The exterior auxiliary shower is located in the water center compartment.
SECTION 7 PLUMBING SYSTEMS 4. Close sewage valve and open waste (grey) water dump valve with a quick pull. Close valve handle as soon as tank is empty. 5. After both tanks have been drained, run several gallons of water into the sewage tank through the toilet. Then open sewage dump valve and drain the tank again. Close valve when done. 6. Close hose valve by pulling handle up until lock snaps into place. 7. Rinse end of sewer hose thoroughly with water and stow. 3.
SECTION 7 PLUMBING SYSTEMS 3. Attach a garden hose from a city water hydrant to the Flushing System inlet fitting in the water system compartment. (This inlet is clearly marked separate from the City Water inlet.) 4. Turn the water on to begin flushing; allow water to run for about three minutes. 5. Disconnect hose from flushing system fitting and close dump valves. When using a sewer hook-up, keep the dump valves closed until a tank becomes full or when preparing to leave the site.
SECTION 7 PLUMBING SYSTEMS Drain Plug Water Line Drain Valves (in water center compartment) The fresh water tank drain valve is operated by pulling on a T-handle for a cable that is located in in the waste dump valve compartment. • Open both Hot and Cold water line valves. • Turn water diverter valve to WATER TANK FILL position. Water Tank Drain Valve (pull to open) Water Heater Drain Plug: The water heater drain plug is located on the outside of the coach behind the water heater service panel.
SECTION 7 PLUMBING SYSTEMS HOLDING TANK CAPACITIES Black Water Holding Tank Models 32T, 36G & 39W......................................................................................................... 52 gal. Models 34H & 39K.................................................................................................................... 48 gal. Grey Water Holding Tank Model 32T..............................................................................................................................
SECTION 8 APPLIANCES & INTERIOR FEATURES (See also Safety Precautions, Section 1 of this manual.) NOTE: Some items described in this section may be optional and, therefore, may not be in your vehicle. A small round bubble level is provided with your refrigerator. Place the bubble level on the bottom surface of the refrigerator and watch the position of the bubble in relation to the circle in top of the level.
SECTION 8 APPLIANCES & INTERIOR FEATURES Normal vehicle leveling to provide comfort for the occupants is satisfactory for refrigerator operation. This will be well within the operation limits of 3° off-level side-to-side and 6°off-level front-to-back. OPERATING INSTRUCTIONS Push door handle downward and pull to open refrigerator. (Lift freezer handle upward.) Slide tab outward to prop door open for storage ventilation.
SECTION 8 APPLIANCES & INTERIOR FEATURES During operation in the AUTO mode, when a higher priority power source becomes available, the operating controls will cease using the current power source and will switch to the higher priority power source. For example, if AC electric becomes available while the refrigerator is operating in the AUTO LP GAS mode, the refrigerator will switch to AUTO AC operation.
SECTION 8 APPLIANCES & INTERIOR FEATURES position. This shuts off all DC power to the light and humidity heater and allows the refrigerator door to be left open for airing without draining the battery. Operating Tips · The refrigerator should already be cold before placing items in it. · Food and beverages should also be cold before placing in RV refrigerator. Never put warm or hot items in a cold refrigerator. · Do not pack the refrigerator too full.
SECTION 8 APPLIANCES & INTERIOR FEATURES bin to the freezer, remember to lower the shut-off arm (on). If the arm is up, the ice maker will not operate. Shut-Down of Ice Maker To turn the ice maker off, simply raise the shutoff arm (wire). Winterizing the Ice Maker When winterizing, make sure the water line is completely drained by following this procedure. 1. Drain coach water lines. See Sect. 10. 2. Unscrew the water supply line from the bottom of the water inlet valve and drain any water left in the line.
SECTION 8 APPLIANCES & INTERIOR FEATURES 9. Water over-filling molds: A. Excessive water pressure. B. Faulty water solution - stuck on. 10. Water not freezing: A. Refrigerator problem. 11. Ice not ejecting: A. 110VAC power not connected. B. Mold heater not working - replace ice maker. C. Ejector motor not working - replace ice maker. 12. Ice bin overfilling: A. Shutoff switch broken. B. Shutoff wire stuck. 13. Low ice production: A. Water not freezing fast enough - refrigerator problem. 14.
SECTION 8 APPLIANCES & INTERIOR FEATURES WARNING IT IS NOT SAFE TO USE COOKING APPLIANCES FOR COMFORT HEATING Cooking appliances need fresh air for safe operation. Before operation 1. Open overhead vent or turn on exhaust fan. 2. Open window FAILURE TO COMPLY COULD RESULT IN DEATH OR SERIOUS INJURY. Unlike large homes, the oxygen supply inside a recreational vehicle is limited due to its size. To avoid danger of asphyxiation, provide proper ventilation when using the gas cooktop.
SECTION 8 APPLIANCES & INTERIOR FEATURES See the manufacturer’s information in your Owner InfoCase for instructions on replacement of light bulbs and grease filter elements. One Place Monitor Panel TM ONEPLACETM SYSTEMS MONITOR PANEL Generator Start/Stop Switch See Section 6, Electrical Systems for generator start-up and shut-down instructions. The ONEPLACE Systems Monitor Panel provides a convenient, central location for checking the condition of all utility systems in your coach.
SECTION 8 APPLIANCES & INTERIOR FEATURES The approximate water levels are measured by sets of electronic probes in the sides of the tanks, so the water must be touching a probe to register at that level. There is generally more water in a tank than indicated on the monitor panel. For example, a water level of 1-2” below the FULL probe, the monitor will show the level to be only 2/3 even though the tank is nearly full.
SECTION 8 APPLIANCES & INTERIOR FEATURES • • • A 12-volt battery typically registers anywhere from 12.5V to 13V when adequately charged. Voltage below 12V indicates a discharged condition; 11.5V or less is dead. Voltage above 13V typically indicates that the battery is being charged by the inverter charger system. WASHER-DRYER (Optional) For complete operating instructions, see the manufacturer’s information provided in your Owners InfoCase.
SECTION 8 APPLIANCES & INTERIOR FEATURES For Quick Recovery Operation (Dual): Turn On both Water Heater switches; the gas one on the monitor panel and the electric one. This will help reheat the water heater tank more quickly than a single source would alone. Use this mode when you are using a larger than normal volume of hot water, for example, when someone is taking a shower and the dishwasher or clothes washer is also being used.
SECTION 8 APPLIANCES & INTERIOR FEATURES you don’t smell gas, go to the next step. 5. Turn on LP gas main tank valve. 6. Turn on the water heater switch on the monitor panel. You may hear a clicking noise as the ignition element begins working. If the burner does not light on first try, the system will stop trying to light burner and go to lockout mode. 7. If lockout happens before main burner lights, turn switch OFF, wait five seconds and turn switch back on. This will restart the ignition cycle.
SECTION 8 APPLIANCES & INTERIOR FEATURES 2. Open a faucet in the motor home to relieve water pressure. 3. Pull the handle of the P-T valve straight out and allow water to flow until it stops. Open CAUTION Any leak in the heat exchanger or its supply or return lines could cause loss of coolant and subsequent engine failure. We recommend that you periodically inspect these connecting lines and the heater to insure that no leaks have developed.
SECTION 8 APPLIANCES & INTERIOR FEATURES LP GAS FURNACE (SUBURBAN) To Start Up: 1. Open the LP gas tank valve by turning fully counterclockwise 2. Move FAN MODE switch to Auto and place FAN SPEED switch in desired position - Lo or Hi. 3. Move THERMOSTAT switch from Off to Heat and press the Temp Selector button (Up/Down arrows) until the desired temperature is shown in the display. 4. Furnace fan will start to blow immediately after setting thermostat. 5.
SECTION 8 APPLIANCES & INTERIOR FEATURES Digital Thermostat Display The digital display normally shows current room temperature, with the word “ROOM” in small letters at the left side of the display. When you press the temperature selector button up or down, the display will show the word “SET” and the new temperature setpoint until you release the button.
SECTION 8 APPLIANCES & INTERIOR FEATURES If the furnace must assist the heat pump three times in a row, the thermostat will shut down the heat pump for two hours and the furnace will take over as the heat source. After two hours the heat pump will become active again and try to be the primary heat source. The furnace acts as a standby heat source if the outside temperature drops below a point that the heat pump can no longer extract heat from the outside air to maintain the desired inside temperature.
SECTION 8 APPLIANCES & INTERIOR FEATURES • • Slide the filter out of the bracket assembly at the passenger side of the cabinet. Slide the new filter into the bracket, being careful to observe airflow markings on the edge of the filter. A/C Filter Size: 14” x 20” x 1” NOTE: Do not block the filter in any way, such as by setting packages or newspapers, etc., on top of it. There must be free air flow for the air conditioner to operate efficiently.
SECTION 8 APPLIANCES & INTERIOR FEATURES To operate amplifier, turn on power switch. A red indicator light will glow while the signal amplifier is in use. Lowering Antenna to Travel Position Rotate antenna until pointer on rotating knob aligns with pointer on ceiling plate. CAUTION Never leave the antenna partially raised or partially lowered. This can damage the crank mechanism gears. Always raise the antenna straight up or lower it completely into the travel position.
SECTION 8 APPLIANCES & INTERIOR FEATURES mitted in digital format so the quality is equal to laser disc or CD. See your Winegard RV Digital Satellite Antenna System Owner’s Manual for instructions about aiming the satellite antenna dish. The coach must be level before attempting to aim the antenna dish. This means one person can watch a ball game coming in on the roof antenna on the bedroom TV while another person watches a satellite or cable TV program or video on the front TV.
SECTION 8 APPLIANCES & INTERIOR FEATURES • • • ANT = Connects to the roof antenna. VCR = Connects selected TV to the VCR/ DVD player. CABLE = Connects to a local cable TV system hookup if you have connected one to your coach. through the hatch in the bottom of the compartment so the door can remain shut while connected. Signal Inputs: ANT - Press to connect selected TV or VCR to the roof antenna. AUX - Press to connect selected TV or VCR to cable TV input or Satellite TV system.
SECTION 8 APPLIANCES & INTERIOR FEATURES TABLE AND CHAIRS The dinette table can be expanded with a leaf when needed. The pull-out leaf is concealed in a pocket beneath the sidewall end of the table. Lower the leaf into position and slide the table top toward the wall. Dinette Chairs Grasp the end of the table firmly and pull away from the wall, exposing the leaf. The dinette chairs are free-standing to allow greater freedom of movement than typical booth style dinettes or pedestal seats.
SECTION 8 APPLIANCES & INTERIOR FEATURES WARNING Be sure all loose items are secured or stored properly while the vehicle is in motion. Possible overlooked items such as canned goods or small appliances on the countertop, cooking pans on the range, or free-standing furniture items can become dangerous projectiles during a sudden stop. 2. Release the catch on the table leg brace and fold the leg up against the bottom of the table. DINETTE/BED CONVERSION To Convert Dinette to Bed: 1.
SECTION 8 APPLIANCES & INTERIOR FEATURES To Revert to Dinette: 1. Replace the table onto the wall support and lower the table leg. 2. Make sure that the table leg is secured into the floor support bracket and the leg brace is locked. To Extend Pull-Out Footrest Section: Squeeze latch behind opening at top of lounge face panel and pull footrest trundle section out until it locks in the fully extended position.
SECTION 8 APPLIANCES & INTERIOR FEATURES and must be unlatched to push back in when stowing the footrest. CAUTION To not recline the lounge completely flat unless the footrest trundle section is extended. Do not occupy the lounge when elevating the seatback from the flat bed position to upright lounge position. If house battery voltage is low, the mechanism may require assistance by lifting the seatback while returning upright from flat bed position.
SECTION 8 APPLIANCES & INTERIOR FEATURES SLEEP NUMBER® BED by Select ComfortTM The clamp knob can be unscrewed and removed to allow you to position the chair as you desire in the living area of the coach. NOTE: Before Traveling - If you plan to travel with your Sleep Number mattress into mountainous regions, either (1) temporarily disconnect the mattress from the pump hose to allow air to escape or (2) partially deflate the mattress chamber.
SECTION 8 APPLIANCES & INTERIOR FEATURES Using Your Sleep Number Remote The buttons of the remote are contoured to be easily distinguished even in the dark if necessary. The ‘firmer’ button has a slight dome shape and the ‘softer’ button is slightly dished. STEP 3. Start by setting the Sleep Number to 50 on the remote. STEP 4: Take time to evaluate your comfort (see diagrams below). NOTE: You must be connected to 110-volt power to adjust the Sleep Number Bed.
SECTION 8 APPLIANCES & INTERIOR FEATURES Altering Your Sleep Number: Unlike an innerspring mattress, a Sleep Number bed can be personalized at any time to the changing condition of your body.
SECTION 8 APPLIANCES & INTERIOR FEATURES • • FRESH WATER TOILET The fresh water toilet in your motor home is very similar to the household type, except that it is designed to use only a small amount of water per flush. It uses a high velocity jet of water, producing a swirl effect, to efficiently cleanse the bowl. And since each flush uses fresh water, no special chemicals are required other than a deodorizing agent, if necessary. 1.
SECTION 8 APPLIANCES & INTERIOR FEATURES The fan speed switch allows you to adjust the amount of circulation you need at any time. Fan On/Off Switch Fuse Fan Speed Selector and gently free the glass with your fingers. A periodic light dusting of talcum powder on the gasket should prevent this from recurring. SLIDER WINDOWS Swing the latch handle straight out from the window. Grasp the sliding window edge frame and slide the window to the side.
SECTION 9 CARE & MAINTENANCE CAUTION Sealants must be inspected every 6 months and resealed if necessary. ROOF The roof is made of Thermo-Panel materials like the walls and floor. It will support the weight of an average adult should it become necessary to repair the roof or roof mounted components. It is not recommended, however, that very large or heavy objects be carried on the roof while the vehicle is in motion. (See page 4-2 for roof loading specifications.
SECTION 9 CARE & MAINTENANCE color. It is best to wax at least every spring and fall, more often if your RV is frequently exposed to extreme sun, smog, soot or other environmental pollutants. Stains and Discolorations Regular cleaning and waxing will help prevent most discolorations and stains, however, please be aware that using caustic, highly alkaline cleaners or any cleaner with ammonia may actually darken your RV’s exterior.
SECTION 9 CARE & MAINTENANCE can detract from the appearance and shorten the lift of carpet and fabrics. ceive immediate attention. Consult a professional carpet and upholstery cleaner for assistance. Upholstery Some fabrics used in this motor home may contain fire retardant and lightfastness additives which can be damaged by use of improper cleaning products. Some water-based household cleaning products are not formulated for use on fabrics and may cause excessive shrinkage or fading.
SECTION 9 CARE & MAINTENANCE Care of Ceiling Fabric While using your coach, your ceiling fabric may become soiled and require spot cleaning from time-to-time. The following information is provided as a guideline for care and cleaning of ceiling fabrics used in your coach. These materials are made from synthetic fibers, so they clean very well with virtually no damage to the color or fabric itself. Most commercially available carpet and upholstery cleaners will do an excellent job removing stains.
SECTION 9 CARE & MAINTENANCE NOTE: In many cases listed above, repeated steps may be required to fully extract contaminant from material. Items listed above with (*) may also be removed through steam extraction method by a professional cleaner or service. NOTE: Always check to see that the cleaner used will not cause damage to the material or fabric by testing on an area out of sight. Water Stains Water stains are the most common problem.
SECTION 9 CARE & MAINTENANCE Always use a cutting board rather than slicing foods directly on your countertop. The underside of one of your sink covers will provide an easily accessible cutting surface. This will keep your countertop looking its best and minimize care efforts. (An occasional sanding with a medium grade (120 grit) sandpaper will remove any cut marks accumulated on the sink cover botton).
SECTION 9 CARE & MAINTENANCE VINYL WALLBOARD Decorative vinyl covered wallboards may be cleaned with a mild soap and water solution. Do not use solvents or abrasive cleaning products. RANGE AND REFRIGERATOR For care and appearance maintenance of the range and refrigerator, refer to the operation and maintenance manual for each of the individual appliances included in your Owners InfoCase. removing ice from the mirrors to protect the reflective surfaces.
SECTION 9 CARE & MAINTENANCE • • • • Engine Coolant Overflow Bottle Transmission Dipstick/Fill Tube Air Filter Restriction Indicator Engine Diagnostic Connector Unlock the service panel and swing it upward. ENGINE TOP COVER The engine top cover is located beneath the rear bed. This cover is only removed for replacement of engine parts or if a complete view of the engine is needed for inspection. To do this, remove the mattress from the bed and lift the hinged bed board upward.
SECTION 9 CARE & MAINTENANCE See the Vehicle Certification Label affixed to the wall near the driver’s seat for tire information. WARNING Make sure all replacement tires are of the same size and ply rating as those installed as original equipment. WINDSHIELD WASHERS AND WIPERS See your chassis operating guide for recommendations, precautions and replacement information on washers and wipers.
SECTION 9 CARE & MAINTENANCE The circuit breakers will pop outward if they are tripped. Simply push in to reset. Always replace plug-in type fuses with those of the same amperage size.
SECTION 10 STORING YOUR MOTOR HOME PREPARING VEHICLE FOR STORAGE Properly preparing your vehicle for storage will lessen the possibility of damage to your vehicle. Prepare the motor home for vacancy just as you would if you were leaving your house for an extended period: · · · · · · Remove all perishables from cabinets and refrigerator Prop refrigerator door open. Turn off LP gas tank. Drain water heater, water tank and holding tank. Drain optional washer/dry.
SECTION 10 STORING YOUR MOTOR HOME NOTE: If your coach is equipped with the refrigerator ice maker option, the ice maker water lines must also be drained. See “Winterizing the Ice Maker” on page 8-4. NOTE: Before using again the following spring: • • • • Water Filter Assembly Below Galley Sink 5. Install the antifreeze diverter plug • Raise the valve handle on the filter base. • Hold the diverter by the support bar as shown and guide it up into the filter base.
SECTION 10 STORING YOUR MOTOR HOME P-T Valve Water Heater Drain Plug 10. After water has stopped draining at all faucets and drain valves, connect a “blow-out” plug to the city water connection on the coach. Then use a hand pump or air compressor regulated to 30 psi or less to force air through the system. (A “blow-out” plug can be purchased at any Winnebago or Itasca dealer. P/N 701705-01-000.) 13. Now turn air pressure off and disconnect water purge adapters.
SECTION 10 STORING YOUR MOTOR HOME tem. This product is available from your dealer and from most RV supply stores. Follow directions on the container to determine the correct amount to use for your coach. See “RV ANTIFREEZE WATER LINE WINTERIZATION SYSTEMS” at the end of this section for instructions. CAUTION Leave by-pass valve handle in NORMAL FLOW position if draining water and blowing out water lines. Place in BYPASS position ONLY when using antifreeze solution in water lines. 16.
SECTION 10 STORING YOUR MOTOR HOME pump, and uses the water pump to draw nontoxic RV water system antifreeze into the water lines. This feature is located in the water center compartment. RV Antifreeze Draw Tube (in water center or near water pump) To Fill Lines with RV Water Line Antifreeze: • Turn water heater by-pass valve to by-pass position. • Remove and save the protective cap from the end of the draw tube (clear vinyl hose).
SECTION 10 STORING YOUR MOTOR HOME line and close flush valve. 6. Add a few gallons of water to the fresh water tank and check for leaks especially at junctions. Also make sure all hangers and supports are securely in place. Sanitize the water system as outlined under “Disinfecting the Fresh Water System” in Section 7. 7. Check operation of all faucets to be sure faucet washers have not hardened during storage. 8. Check sealing valve in the toilet for proper operation and lubricate with silicone spray. 9.
INDEX 110-Volt AC System..................................... 6- 1 110-Volt Circuit Breakers............................. 6- 4 110-Volt Receptacles .................................... 6- 5 12-Volt Chassis Circuit Breakers ................. 6- 8 12-Volt DC System....................................... 6- 8 12-Volt Fuses and Circuit Breakers.............. 6- 8 12-Volt House Circuit Breakers ................... 6- 4 A About This Manual ....................................... 0- 1 Air Conditioner Filter ......
INDEX Fuel Selection ............................................... 2- 2 Fuel/Water Separator .................................... 9- 8 G Gas/Electric Water Heater .......................... 8- 10 General Warnings ......................................... 1- 1 Generator Hourmeter .................................... 6- 7 Ground Fault Circuit Interrupter................... 6- 5 H Hazard Warning Flasher ............................... 3- 1 Hazard Warning Lights.................................
INDEX Spots and Stains ............................................ 9- 3 Starting and Stopping Engine ....................... 2- 2 Stepwell Cover.............................................. 2- 7 Suspension Alignment and Tire Balance...... 9- 9 Swivel Glider Lounge Chair ....................... 8- 25 SWR Adjustment ........................................ 2- 22 T Table and Chairs ......................................... 8- 21 Thermal Overload Protector ......................... 6- 5 Tires ................
IMPORTANT SERIAL NUMBERS Motor Home (Coach): Year _________ Model ___________________ Serial _____________ Chassis: Make ___________________ Serial (VIN) ______________ Roof Air Conditioner: Furnace: Water Heater: Power Converter: 110-Volt Generator: Range Microwave Oven: Refrigerator Television: Video Cassette Player: Brand ___________ Brand ___________ Brand ___________ Brand ___________ Brand ___________ Brand ___________ Brand ___________ Brand ___________ Brand ___________ Brand ___________ Model M
MAINTENANCE RECORD Date Odometer Mileage Description of Service Cost
FUEL & OIL RECORD Date Odometer Mileage Fuel Gal. Oil Qts. MPG Cost Date Odometer Mileage Fuel Gals. Oil Qts.
FUEL & OIL RECORD Date Odometer Mileage Fuel Gal. Oil Qts. MPG Cost Date Odometer Mileage Fuel Gals. Oil Qts.
