Owner`s manual

SECTION 8
APPLIANCES & INTERIOR FEATURES
8-22
DINETTE/BED CONVERSION
To Convert Dinette to Bed:
1. Lift the seats and remove the seat support
‘bumpers’ to allow the seats to lie flush for
use as a bed. Do not lose bumpers because
you must refit them when reverting back to
dinette seat configuration.
2. Release the catch on the table leg brace and
fold the leg up against the bottom of the
table.
3. Remove the table from the wall support
bracket by lifting the end of the table. Then
lower the table to rest on the cleats attached
to each dinette bench.
4. Arrange dinette cushions to cover bed area.
Be sure all loose items are secured or
stored properly while the vehicle is in
motion. Possible overlooked items
such as canned goods or small appli-
ances on the countertop, cooking
pans on the range, or free-standing
furniture items can become danger-
ous projectiles during a sudden stop.
WARNING