Care & Use Instructions

16
PAIRING CAMERA
The Solar Powered Wireless Backup Camera is pre-paired with the Touch Panel Mirror Monitor,
and it is set as rear camera as default. You should see the following screen that shows the rear
view if the Touch Panel Mirror Monitor is powered and the Solar Powered Wireless Backup
Camera is fully charged.
If you can not see camera image showing on the Touch Panel Mirror Monitor, pair the Camera with
the following steps:
1. Press and hold the Power Button under the
camera for 6 seconds, or until the LED ashes
Blue continuously. The camera will be turned
on and enter Pairing Mode for one minute.
2. Or press and hold the Power Button for 5
seconds to enter Pairing Mode if the camera is
already on.
3. On the Touch Panel
Mirror Monitor, tap the
Settings icon and then
tap Pair Camera to
enter the pairing screen. Tap
Front/Rear Camera - Click
to pair.
Blue LED light