User's Manual
11
The motion sensor covers a large area 10 m / 33 ft and the light would be dimmed to
50% when there is no movement detected in 10 minutes, and the light would be o
completely when there is no movement detected in further 30 minutes.
You can choose this setting to have light turned o in day time. During day time with
good amount of ambient light, the lighting xture would not be turned ON even if
movement is detected by the smart sensor. During evening or when ambient light
decreases below the preset setting “50 lux”, the lighting xture will be turned ON
when there is movement detected.
The light would be dimmed to 30% when there is no movement detected in 5
minutes, and the light would be OFF completely when there is no movement detected
in further 10 minutes.
Some recommended settings:
Garage / Warehouse / Indoor use:
1 & 2 Distance: 10 m / 33 ft
3 & 4 Time Dim: 10 min
5 & 6 Light Sensor Auto O: O
7 & 8 Dim Level: 50%
9 & 10 Motion Sensor Auto O: 30 min
Covered Patio / Backyard:
(light turn o during day time)
1 & 2 Distance: 3 m / 9.8 ft
3 & 4 Time Dim: 5 min
5 & 6 Light Sensor Auto O: 50 lux
7 & 8 Dim Level: 30%
9 & 10 Motion Sensor Auto O: 10 min
You can select “OFF” if you want to have the lighting xture be turned ON all the
time. By selecting this mode, light sensor function will be disabled.
After choosing the desired DIP switch control setting, please put back the diuser
(cover) properly by closing all of the retaining clips and screws, to ensure the
product remains water proof and dust proof.