User's Manual

4
Product Specications:
1. Operating Voltage: 120V ac, 60 Hz
2. Wattage: 48 W / Stand-by mode: 1.5 W
3. Light Output: 3800 Lm
4. Color Temperature: 4000K
5. LED Life Cycles: up to 50,000 hrs
6. Dimensions: 126 cm / 49.4 in (L) x 12.7 cm / 5 in (W)
x 8.8 cm / 3.46 in (H)
7. Weight: 2.6kg / 5.7lb
8. Waterproof rating: IP 65
9. Operating temperature: -4°F to 104°F / -20°C to 40°C
Installation Procedures:
The product is intended to be connected to a plug and does not need to be switched
on/o as it is controlled by the motion sensor. You do not need to disconnect from plug
except for changing Smart Sensor Control setting.
After reconnecting power, please wait for 10 seconds to allow for the calibration
time of sensor.
Ceiling hanging with chains:
This product is ETL/cETL Listed
1. Select a suitable mounting location,
and make sure the wooden surface is
suitable for supporting the lighting
xture. Use the measuring template to
mark the hook locations on mounting
surface.
Final installed illustration
1