User's Manual

6
Ceiling ush mount:
Final installed illustration
1. Select a suitable mounting location,
and make sure the wooden surface is
suitable for supporting the lighting xture.
Use the measuring template to mark the
hook locations on mounting surface.
2. Wear safety glasses before drilling
pilot holes. Drill two 5/64 inch / 2 mm
diameter pilot holes.
2
3. Screw on the mounting bracket with
wood screws provided. Repeat for another
mounting bracket.
Note: For concrete or drywall, you may use
drywall screws along with plastic anchor
instead of wood screws.
3
4. Clip mounting brackets onto the
lighting xture.
4
1