User's Manual

7
4a. Slip wire hanging hook into the self-
tapping screw hook. Repeat for another
hanging hook.
4b. Insert the hanging hook into the middle
opening of mounting bracket. Repeat for
another mounting bracket.
5. Clip mounting brackets onto the
lighting xture.
2. Wear safety glasses before drilling pilot
holes. Drill two 5/64 inch / 2 mm diameter
pilot holes.
3. Screw in the self-tapping screw hook
until only the curved eye is visible, no
screw threads should be showing. Repeat
for another hook.
1. Select a suitable mounting location,
and make sure the wooden surface is
suitable for supporting the lighting xture.
Use the measuring template to mark the
hook locations on mounting surface.
Ceiling hanging with hooks:
Final installed illustration
1
3
2
a
b
4
5