User's Manual

WARNINGS
ML-55931_V1
USING THE APP CONT.
1. Do not install or use product if it, in any way, impairs the safe
operation at home. You assume all responsibilities for the safe and
prudent operation of the product and APP.
2. Follow manufacturer’s instructions to ensure the product is properly
& safely installed.
3. Check your state or provincial laws before installing.
4. This product is intended solely for decorative purposes.
Manufacturer and Seller assume no liability for installation or use, which
are solely the responsibility of the purchaser.
5. Do not stare directly into the LED light strip when illuminated. Do not
allow pets or children to stare directly into the LED light strip when
illumniated.
6. The Manufacturer and Seller are not responsible or liable for
consequential, incidental, or indirect damages, whether to person or
property, resulting from the installation or improper use of this product.
WARNING: This product contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm.
Have a comment or question?
Email us at: [e-mail]
or visit us online at: www.winplususa.com
Winplus North America, Inc.
820 South Wanamaker Avenue, Ontario, CA 91761 USA
Tel: [phone]
© 2016 Winplus North America, Inc.
All rights reserved.
3M™ is a trademark of 3M Company.
iPhone, iPad and iPod touch are trademarks of Apple Inc.
Android is a trademark of Google Inc.
“Contains Transmitter Module FCC ID: WUI-LM55931”
FCC statement:
FCC Part 15.19 Warning Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
FCC Part 15.21 Warning Statement
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED
BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
FCC Part 15.105 Warning Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy, and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for
help
RF statement:
The device has been evaluated to meet general RF exposure
requirement.
To maintain compliance with FCC’s RF exposure guidelines, this
equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body.
A
B
Master On/Off Switch
LED Zone Functions:
Connect and control up to 4 separate
zones.
On/Off: Press each zone icon to turn LED
On or Off.
Move Zone Icon:
Press and hold zone icon, select “Move”
to position each zone icon at your desired
location.
Rename Zone Icon:
Press and hold zone icon, select
“Rename” to rename each icon. (Note:
Maximum 4 characters).
Select Multiple:
You can select multiple zones and control
the same setting at once.
C
D
E
F
A
B
C
D
E
F
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Winplus Co., Ltd. is under
license. Other trademarks and trade names are
those of their respective owners.
Press and hold zone icon, select “Select
Multiple” then select your desired zone by
pressing “Confirm”. To ungroup your
selection, press and hold zone icon and
select “Ungroup”.
Save Preset:
You can save your favorite settings.
After creating your setting, press "Save
Preset" and enter your preset name. You
can save up to 10 preset settings.
Select Preset:
You can select your previously saved
preset setting, press "Select Preset" and
choose your saved setting.
Delete Saved Preset Setting:
To delete a saved preset setting, press
"Select Preset" and press and hold the
preset setting that you wish to delete.
Press “Yes” to delete.
Select Color:
Choose from up to 49 different colors.
Press "Select Color", select your desired
color and press “Confirm”.
Brightness:
Slide bar to adjust brightness setting.
LED Mode:
Choose from 8 different modes
Note: Music Mode is sound activated.
Speed:
Slide bar to adjust the speed of the
movement from each LED Mode.