User Manual
JDY-25M Super BLE Bluetooth Module
20
PB:Indicates output level
P1:Indicates OUTPUT1 level
P2:Indicates OUTPUT2 level
P3:Indicates OUTPUT3 level
P4:Indicates OUTPUT4 level
P5:Indicates OUTPUT5 level
AT+CUIO +CUIO=<P1>,<P2
>,<P3>,<P4>,<P5>
,
Note: This instruction only controls the IO level of the current module through the serial port.
39、Master setting/query - Remote slave output IO level
Instruction Response Parameter
AT+TGIO<PA>,<PB>, +OK PA:Output IO number (1 to 5)
PB:Indicates output level
P1:Indicates OUTPUT1 level
P2:Indicates OUTPUT2 level
P3:Indicates OUTPUT3 level
P4:Indicates OUTPUT4 level
P5:Indicates OUTPUT5 level
AT+TGIO +TGIO=<P1>,<P2
>,<P3>,<P4>,<P5>
,
Note: This instruction is the master controls the slave level after the master-slave connection.
40、Master setting/query - Remote slave wireless parameters
Instruction Response Parameter
AT+FUNC<Param> +OK
Param: Please refer to page 18 for
wireless setting instruction table::
APP configures current device
instruction table
Note: Only when the master is connected to the slave can the instruction be sent effectively.
41、Set/query - Subtype parameters
Instruction Response Parameter
AT+SUBTYPE<Param
>
+OK
Param:1 or 0
1:KEY and OUTPUT associated
0:KEY and OUTPUT not associated