TABLE OF CONTENTS 1. Introduction �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������1 2. Package Contents �������������������������������������������������������������������������������������������������������������������������������������������������������������������2 3.
1. Introduction Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an experienced technician if you are not comfortable installing the product. You can also contact Winplus at 866.294.
2. Package Contents 1. 5” Dash Monitor 1. 5. 2. 6. 3. 7. 4. 8. 2. 1 Backup Camera 3. 12V/24V Power Adapter for Monitor 4. Hardwire Cable for Monitor 5. Suction Cup Mount for Monitor 6. Install Kit 7. User’s Manual 8.
3. Product Specifications 1. 2. 3. 4. Frequency: 2.4GHz Operating Voltage: DC 12V / 24V Operating Temperature: -10~+50°C Maximum Signal Range: 30 feet/10Metres (without Interference or Obstruction) 5. Camera Water Resistance: IP67 rating 4. Installation Guide Dash Monitor Installation 1. Stick the Suction Cup Mount on the windshield and adjust to your desired position. 2. Hook the Dash Monitor on to the windshield mount. 3. Remove the Yada Dash Monitor protective overlay. 4. Now power the monitor: a.
also watch some common installation videos at www.letsyada.com for more information. Caution: This unit is designed to operate on a 12V/24V DC NEGATIVE GROUND electrical system. Connecting to other types of electrical systems will cause damage to your vehicle. Please contact the manufacturer if you are unaware of the system type in your vehicle. 1. Remove your license plate 2. Determine the best route for the Camera Cable from the top of your license plate to the inside of the vehicle.
10. Use the provided Zip ties to secure wires neatly within your car. 11. Replace the light socket back into the reverse light housing. 12. Replace any interior panels that may have been removed to access the taillight and close your trunk or rear hatch. 13. Standing with the license plate in one hand and the Camera in the other hand, slide the Camera along the top of the license plate in order to determine the placement. Best placement is in the center of the license plate.
5. Settings and Operation Menu Down Power Parking Aid Line / Enter Up Channel Button Power ON/OFF • The Dash Monitor will automatically turn ON when it is connected to a power source. • Hold the power button to turn ON/OFF the unit if necessary. Connection and View Selection • The Backup Camera that is included in this System is set as the Default Camera (Camera 1).
Brightness and Contrast You can adjust the contrast and brightness of the Monitor according to your desired level. Note: Contrast and Brightness setting ONLY works while the camera image is on the screen. To Adjust Brightness 1. Press “MENU” 2. Go to “Brightness” by pressing “– “ 3. Press “Parking Aid Line” to enter 4. Press “+ “ or “– “ to adjust the contrast level 5. Press “Parking Aid Line” to confirm and exit To Adjust Contrast 1. Press “MENU” 2. Go to “Contrast” by pressing “– “ 3.
Pairing The Yada Backup Camera (Camera 1) included with this Expandable System is already paired with the monitor. If you can not see the Camera image, pair the Camera with the following steps: 1. Turn on your vehicle and place in reverse gear. This will power the Monitor and the Camera. 2. On the monitor: a. Press “Menu” b. Go to “Pair Camera” and select “Camera 1” c. Press “Parking Aid line” to confirm d.
a. b. c. d. Press “Menu” Go to “Pair Camera” and select “Camera 2” Press “Parking Aid line” to confirm The unit is now in pair mode - if the monitor is able to connect with the Camera, the display will show “Pair OK”. If no camera is found, then the display will show “Pair Fail”. If you receive a “Pair Fail” message, please call our technical support to assist in troubleshooting. Set Default Camera • The Backup Camera that is included in this System is set as the Default Camera (Camera 1).
To change your Default Camera: 1. Press “MENU” 2. Go to “Set Default” by pressing “ – “ 3. Press “Parking Aid Line” to enter 4. Press “+ “ or “– “ to select Camera 1 or Camera 2 5. Press “Parking Aid Line” to confirm and exit 6. Safety Information WARNING: A failure to read and follow these warnings and instructions may result in a serious accident, including damaged property or a serious injury, including loss of life.
• • • • • • • • • • • • • • opposite than when viewed in the rear view and outside mirrors. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. The Backup Camera “night vision” feature is an aid to a driver but is limited. Always use your own eyes to confirm the vehicle’s surroundings, as the displayed image may be faint or dark, distorted, or not entirely visible. Always check behind and all around the vehicle visually with mirrors before proceeding.
• • • • • • • • • Do not submerge Camera in water, which can cause internal damage to the Camera. If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally. The Digital Camera can withstand the effects of rain, snow, and inclement weather. When strong light directly enters a camera, objects may not be displayed clearly. The screen may flicker under fluorescent light.
7. Maintenance & Warranty Cleaning • If dirt, rain or snow attaches to the Camera, the monitor may not clearly display objects. If water droplets, snow or mud adhere to the Camera lens, rinse with water and wipe with a dry cloth. • Do not use alcohol, benzene or thinner to clean the Camera. This will cause discoloration. To clean the Camera, wipe with a clean cloth dampened with mild cleaner diluted with water and then wipe with a dry cloth.
due to normal wear and tear. 5. Repair or replacement parts supplied by Winplus North America under this warranty are protected only for the unexpired portion of the original warranty. 6. This is a “repair or replace” warranty only, and does not cover the costs incurred for the installation, removal or reinstallation of the product, or damage to any mobile phone device or vehicle.
Winplus North America and/or its affiliates do not guarantee or promise that the user of Backup Camera Expandable System will not be in an accident or otherwise not collide with an object and/or person. Our Backup Camera Expandable System is not intended in any way to be a substitute for careful and cautious driving or for the consistent adherence to all applicable traffic laws and motor vehicle safety regulations.
and workmanship for 12 months from the date of original purchase. Where permitted by law, Winplus liability shall be limited to that set forth in this limited express warranty. This limited express warranty shall be the exclusive remedy of the purchaser and Winplus makes no other warranty of any kind aside from the limited express warranty stated above. OWNER’S RESPONSIBILITIES: In order to provide you with the proper warranty service, we request that you adhere to the following procedure: 1.
8. General Information Customer Service/Contact For questions or issues regarding the product, please visit www.letsyada.com or contact Winplus in your area/region to speak to our customer service representative: Winplus North America Winplus Europe Winplus Australia Winplus New Zealand Winplus Asia Tel.: 866-294-9244 Tel.: 909-752-3074 Tel.: 44-1440-7138888 Tel.: 61-3-9720-4143 Tel.: 64-9-5254575 Tel.: 852-2798-8932 You can also contact us online by visiting www.winplus.
• • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: IC Radiation Exposure Statements: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
NORTH AMERICA EUROPE AUSTRALIA NEW ZEALAND ASIA www.winplus.com Tel: 866-294-9244 Fax: 310-496-2740 Tel: 44-1440-713888 Fax: 44-1440-713889 Tel: 61-3-9720-4143 Fax: 61-3-9720-4165 Tel: 64-9-5254575 Fax: 64-9-5256817 Tel: 852-2798-8932 Fax: 852-2795-0241 www.letsyada.com © 2014 Winplus North America Inc. All Rights Reserved. Winplus, the logo design, and Yada are trademarks or registered trademarks of Winplus North America Inc. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.