blind spot assist system Installation & Operation Manual v1.0 w w w. l e t s y a d a .
Thank You Thank you for purchasing the Blind Spot Assist System. This system was designed to give additional convenience when driving or operating your vehicle. The system helps detect obstacles in your vehicle’s blind spots. All parts needed to install and operate the system are included in this package. Winplus North America 820 South Wanamaker Avenue, Ontario, CA 91761 customercare@winplususa.com www.winplususa.
Contents • WARRANTY / LIABILITIES • PRIOR TO INSTALLATION • PACKAGE CONTENT • TECHNICAL SPECIFICATIONS • INSTALLATION INSTRUCTIONS • OPERATIONS • CUSTOMER SERVICE / CONTACT US • FCC / ICC 2
Warranty / Liabilities WINPLUS NORTH AMERICA LIMITED WARRANTY Winplus North America warrants, to the original purchaser, that its products are free from defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, Winplus North America’s liability shall be limited to that set forth in this limited express warranty.
ATTN: CUSTOMER CARE PRODUCTS RETURNS 820 South Wanamaker Avenue, Ontario, CA 91761 3. Please include a detailed explanation of the problem you are having. 4. If your product is found by Winplus North America to have a defect in material or workmanship, within the warranty period, it will be repaired or replaced at no charge and returned to you prepaid. Winplus North America makes no other warranty of any kind aside from the limited express warranty stated herein.
WINPLUS EUROPE WINPLUS AUSTRALIA / HONG KONG LIMITED WARRANTY Winplus warrants, to the original purchaser, that its products are free from defects in material and workmanship for 12 months from the date of original purchase. Where permitted by law, Winplus liability shall be limited to that set forth in this limited express warranty.
Prior To Installation Read all the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an experienced technician if you are not comfortable installing the product. You can also contact Winplus at 866.294.
• When washing the vehicle with high-pressure water, be sure not to spray directly into the sensor. Otherwise, water may enter the sensor unit causing water condensation, malfunction, fire or an electric shock. • Do not strike the sensors. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. • This product will only monitor obstacles that are within the field of view of the sensors.
Technical Specifications Wiring Diagram Operation Voltage: DC 10-16V Operation Temperature: -20~70℃ Sensor Horizontal Detection Angle: 120° Installation Instructions IMPORTANT: To ensure proper installation, it is highly recommended for this unit to be installed by a professional. These instructions do not apply to all types of vehicles. They are meant only as a general guide due to the large number of vehicle makes and models. For vehicle specific questions, contact your vehicle’s manufacturer.
Connect left & right turn light wire (Green & Yellow) Installation The following provides proper mounting instructions. NOTICE: Please ensure that the display is secured and mounted where it would NOT obstruct any OEM vehicle safety features. In an event of an accident, manufacturer is not responsible for bodily injury caused by the display being a projectile. CAUTION: Ensure display monitor location will not obstruct your vision while driving.
• There are “L” & “R” labels on wiring harness, please connect sensor to corresponding connector • Please confirm the sensor “UP” side faces upward and the installation height is high enough • Please make sure that the wiring harness is fixed well and far away from vent-pipe • Please remove burrs and flash from the hole, make the hole fit for sensor, not too tight or loose, otherwise the system should be abnormal • The connector of the control box should face ground to prevent water • Clip the two warning L
DISPLAY SETTING function setting button OPERATION Press and hold the function setting button for 1-2 seconds Press and hold the function setting button for 3-4 seconds MODE DISPLAY Volume High 3 Volume Middle 2 Volume Low 1 Volume Off 0 Turning Alarm Switch On C1 Turning Alarm Switch Off C0 SAFE OPERATING TIPS • Do not scratch the sensor when cleaning dirt or snow from the cover. • The sensor has a water resistant construction. Do not detach, disassemble or modify it.
SAFETY AROUND AND BEHIND OTHER VEHICLES Using the blind spot assist system is not enough to completely overcome a vehicle’s blind spot. Many preventable injuries and deaths occur in driveways or parking lots when drivers do not see children, pets, or others near their vehicles. Here are a few safety tips that will help you to avoid a backover accident. • Walk completely around your vehicle before getting in. Check for kids, toys, and pets before entering the vehicle and starting the engine.
FCC / ICC Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device complies with Part 15 of the FCC Rules.
14
NORTH AMERICA 820 South Wanamaker Avenue, Ontario, CA 91761 Tel: 909-752-3074 Fax: 310-496-2740 EUROPE Unit 4, Two Counties Estate, Falconer Road, Haverhill, Suffolk CB9 7XZ, U.K.
