Manualshelf

Instructions / Assembly

ManualsBrandsWINSOON ManualsOther8 ft. Black Heavy-Duty Steel Rolling Barn Door Hardware Kit for Single Wood Door with Non-Routed Floor Guide
12345678
Step 3: Drill holes and install your track
①Concrete wall: Drill out the holes by using a dril
with 3/8” (10mm)drill bit.
②Wooden wall: Drill out the holes by using a drill
with 1/4” (6mm) drill bit.
③Install the track refer to the below image.
Step 4: ①If you use type A floor guide , you will need to
open a slot [5/16” (7mm) wide, 3/4” (20mm) deep] at
the bottom of the door with a slotting machine.
②If you use type B floor guide , please skip this
step.
5/16”(7mm)
3/4”(20mm)
3
Concrete wall
Wooden wall