Manualshelf

Instructions / Assembly

ManualsBrandsWINSOON ManualsBarn Door Hardware7.5 ft./90 in. Black Sliding Bypass Barn Door Hardware Track Kit for Double Doors with Non-Routed Floor Guide
12345678910
※Hardware Installation
2
1-7/8“
(48mm)
3-9/16”
(90mm)
2-3/8”~3-15/16”
60mm-100mm
(recommend)
φ3/8” (10mm)
Prepare Your Doors
Step 1: Attach Steel Hangers to Your Doors
Drill 3/8” (10mm) holes at the distances from the top of the
doors shown in the above chart. Recommended: The Hangers
should be between 2”-4” from the door edge to the center of Hanger.
Attach Hangers with the Hanger Bolts, Washers and Acorn
Nuts as shown below.