Manualshelf

Instructions / Assembly

ManualsBrandsWINSOON ManualsBarn Door Hardware7.5 ft./90 in. Black Sliding Bypass Barn Door Hardware Track Kit for Double Doors with Non-Routed Floor Guide
12345678910
6
Step 8: Attach Brackets to the Wall
a.Loosely attach each bracket to the wall with Short Lag
Screws and washers (and hollow wall anchors if needed).
b.Fully tighten all Lag Screws with your ratchet. Don’t over-
tighten screws as you may strip the studs or anchors.
c.Type B or Type C bracket, please refer to the illustration
below.
Step 9: Install the Outside Track
Using the short spacers, Track Bolts, Washers and Nuts
attach the outside Track to the Bypass Bracket as shown in the illus-
trations below.