Assembly Instructions

ASSEMBLY INSTRUCTIONS

INSTALLATION PROCEDURE：

1.Turn off the Power.

2.Attached the mounting plate to the Junction Box by mounting screw.

3.Electrical connections,connect the black wire from fixture to the black supply

wire and the white fixture wire to the white supply wire using wire nut.

4.Carefully tuck all wires back into the outlet box.

5.Install fixture canopy to the junction box.

6.Final installation of the acrylic diffuser and clockwise rotation in place.

SAVE THESE INSTRUCTIONS AND WARNINGS：

This product is designed for dimming with many 120V Leading Edge(LE)and

Trailing Edge(TE)phase control dimmers.compatible with most residential type

dimmers available on the market.The dimming performance will depend on kind

of dimmer and dimmer settings.(not provided).

WHITE SUPPLY WIRE

FIXTURE CANOPY

JUNCTION BOX

BLACK SUPPLY WIRE

WIRE CONNECTOR

HOUSE GROUND WIRE

MOUNTING PLATE

JUNCTION BOX SCREW

MOUNTING SCREW

ACRYLIC

PAGE 1
ASSEMBLY INSTRUCTIONS JUNCTION BOX WIRE CONNECTOR WHITE SUPPLY WIRE BLACK SUPPLY WIRE HOUSE GROUND WIRE MOUNTING PLATE MOUNTING SCREW JUNCTION BOX SCREW FIXTURE CANOPY ACRYLIC INSTALLATION PROCEDURE： 1.Turn off the Power. 2.Attached the mounting plate to the Junction Box by mounting screw. 3.Electrical connections,connect the black wire from fixture to the black supply wire and the white fixture wire to the white supply wire using wire nut. 4.Carefully tuck all wires back into the outlet box. 5.