Installation Instructions

1A
Install the Fixture
2
If necessary, screw the threaded nipple tightly onto the mounting plate.
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the threaded nipple, and secure it in place by screwing the coupler
onto the nipple.
Screw the threaded pipe to the bottom of the coupler.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
Place the shade, plastic washer, and steel washer onto the threaded pipe, then secure them in place by screwing the hex nut onto the pipe.
Place the cup and rubber washer onto the pipe, then secure them in place by screwing the finial onto the pipe.
1
2
3
4
5
6
7
8
9
JUNCTION BOX
MOUNTING PLATE
CANOPY
SHADE
PLASTIC WASHER
LAMP
10
6
THREADED NIPPLE
THREADED PIPE
COUPLER
5
4
8
HEX NUT
RUBBER WASHER
STEEL WASHER
CUP
FINIAL
9
10
7