Installation & Assembly

ManualsBrandsWinston Porter ManualsBedroom SetsBeagan King Platform Solid Wood 4 Piece Bedroom Set

Qty.

Footboard

Descriptions

Drawer Slat Support

Bed Rail

Headboard Panel

NO.

Parts List

Bed Slat Support

Bed Slat 3Holes

Center Slat With 3 Holes

Drawer

Descriptions

NO.

Qty.

CSK M4 x 32mm

L KEY M4

L KEY M5

JCBC SCREW M6 x 35mm

CSK M4 x 16mm

Drawer Slat

Bed Slat 2Holes

Headboard Leg Left (L)

Headboard Leg Right (R)

JCBC SCREW M6 x 50mm

FLAT WASHER Ø

" x 20mm

SPRING WASHER Ø

Slat Cover

Headboard Support Rail Front 1

Headboard Support Rail Back 1

CSK M4 x 25mm

Hardware Pack Headboard & Footboard

Drawer Slat Support Stopper

Page 1 of 6

ASSEMBLY INSTRUCTION

KING SIZE BED

Summary of content (6 pages)

PAGE 1
ASSEMBLY INSTRUCTION KING SIZE BED Parts List NO. Descriptions Qty. A Headboard Panel 1 B Headboard Leg Left (L) 1 1 C Headboard Leg Right (R) 1 D Headboard Support Rail Front 1 E Headboard Support Rail Back 1 F Footboard G Bed Rail 2 H Drawer Slat 1 Drawer Slat Support I 1 J Bed Slat 3Holes 3 K Bed Slat 2Holes 10 L Bed Slat Support 3 M Center Slat With 3 Holes 1 N Drawer 2 O Slat Cover 1 P Drawer Slat Support Stopper 1 Hardware Pack Headboard & Footboard NO.
PAGE 2
ASSEMBLY INSTRUCTION KING SIZE BED STEP 1.1: Attach & tighten the Headboard Leg (B) & (C) to the Headboard (A). Affix Headboard & Headboard Leg using JCBC screw M6 x 35mm (4), Spring Washer (6) ,Flat Washer (7) using L Key (8). STEP 1.2: Attach Headboard Support Rail Front (D) & affix using CSK Screw M4 x 25mm (2). STEP 1.3: Followed by Attach Headboard Back Support Rail (E) & affix using CSK Screw M4 x 25mm (2). (Attach at the top of wood cleat as shown in diagram) D C STEP 1.3 2 A Wood Cleat STEP 1.
PAGE 3
ASSEMBLY INSTRUCTION KING SIZE BED STEP 2.1: Attach the Bed Rail (G) to Headboard Leg. STEP 2.2: Tighten SCREW on Headboard Leg by using L KEY M5 (9) & repeat the same step on Footboard (F). STEP 2.3: Move the bed to the desired position. STEP 2.4: Attach the Drawer Slat (H) each to a Drawer Slat Support (I) and fix with Drawer Slat Support Stopper (P). STEP 2.5: Fix the Drawer Slat (H) to Bed Rail (G) with CSK M4 x 32mm (3). STEP 2.6: Move 'T' Runner at Footboard (F) to Drawer Slat (H). G G 9 STEP 2.
PAGE 4
ASSEMBLY INSTRUCTION KING SIZE BED STEP 3.1: Insert Drawer (N) to Footboard (F) until completely closed. STEP 3.2: Tighten 'T' Runner at Footboard (F) to Drawer Slat (H) with CSK M4 x 16mm (1). STEP 3.3: If Drawer (N) does not close properly,adjust the adjuster at the bottom of Drawer Slat Support (I) up or down until the Drawer (N) closes tightly. STEP 3.1 N 1 STEP 3.2 G STEP 3.
PAGE 5
ASSEMBLY INSTRUCTION KING SIZE BED STEP 4.1: Attach the Center Slat (M), Bed Slat (J) to Bed Slat Support (L).Tighten with JCBC M6 x 60mm (5) by using L KEY M4 (8). STEP 4.2: Attach Bed Slat (J) & Bed Slat (K) and tighten to Bed Rail (G) with CSK M4 x 32mm (3). STEP 4.1 STEP 4.
PAGE 6
ASSEMBLY INSTRUCTION KING SIZE BED STEP 5.1: Attach the Slat Cover (O) to top Bed Slat (J & K) . STEP 5.2: Close the distance Slat Cover (O) to Footboard (F).Tighten Slat Cover (O) to Wood at Footboard (F) with CSK M4 x 16mm (1). O 1 F STEP 5.2 O STEP 5.