Installation & Assembly

1 2
WALL MOUNTED WINE RACK (8 BOTTLES)
Product installation and mounting direction (wall mount):
Tools required for installation
Wear safety goggles
Electric drill with assorted bits
(not included)
Pencil and tape measure (not included)
A. 1 PC B. 4 PCS C. 2 PCS D. 2 PCS
E. 25mm Screw
8 PCS
F. 12mm Screw
12 PCS
G. Wall anchors
4 PCS
Philips screwdriver if needed and pliers
(not included)
Leveler (included)
21x29.7cm
PARTS LIST:
Please lay out all parts prior to assembly or installation.
Read instructions prior to assembly or installation.
Set Includes
NOTE: Use leveler to check the horizontal screw points before drilling and always measure twice before drilling.
A
B
B
B
C
C
D
D
E
E
E
E
F
F
F
F
F
F
E
G
G
1. Assemble the rack with all the included attachments as
shown in the diagram above.
2. Carefully, measure where you want to mount the rack
on the wall. Use a pencil to mark where to drill the
holes for the screws to mount the rack on the wall.
Insert the wall anchors into the drilled holes. If
necessary, gently tap in with a hammer.
Mount the assembled wine rack by inserting the
screws through the (4) brackets into the anchors in the
wall and tighten until the screws are flush.