ASSEMBLY INSTRUCTIONS Executive Desk with Hutch and USB, Charger Hub
ASSEMBLY OVERVIEW Hutch maximum weight capacity = 22 lbs Desktop maximum weight capacity = 132 lbs Drawers maximum weight capacity = 20 lbs 2 of 16
HARDWARE LIST EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE. HARDWARE KIT PART DESCRIPTION QT Y. A Bolt 54 B1 Large Cam 32 B2 Small Cam 22 C Dowel 20 D M4 x 14MM 26 E M5 x 40MM 12 F1 M4 x 22MM 4 - READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING. - REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION. - OPEN THE HARDWARE AS NEEDED . - ASSEMBLE IN AN AREA WITH PLENTY OF SPACE. - READ EACH STEP BEFORE BEGINNING CONSTRUCTION. - NEVER FORCE THE SCREWS OR FITTINGS.
Insert twenty Dowels (C) into the boards shown below. Refer to the drawings for which holes in the rollers to use.
ASSEMBLY INSTRUCTIONS STEP 3 Fix eighteen Bolts (A) to the Boards shown below. A x 18 30 Right 30 Left STEP 4 Insert twelve Large Cams (B1) into the Left (2) and Right (6) Boards. Make sure the arrows are pointing toward the holes where the bolts go in. Attach the Left Corner Boards, Front (1) and Back (3) to the Left Board (2) and one Trim Board (4) by inserting the Bolts and turning the Cams clockwise half a turn to lock into place.
Fix two Bolts (A) to the Back Board (8).
Fix ten Bolts (A) to the underside of the Desktop (11). 10 ten shown. Align the Bolts in the Desktop (11) with the holes and the Dowels in the lower part of the desk.
ASSEMBLY INSTRUCTIONS STEP 9 Fix one Bolt (A) to the center of the Hutch Back (12). Insert the Grommet (J) into the round hole. Insert the USB, Charger Hub (29) into the opening and fasten it with two Screws (D). Dx2 Ax1 12 12 J STEP 10 Insert a Small Cam (B2) into the Hutch Shelf (13). Attach the Hutch Back (12) to the Hutch Shelf by inserting the Bolt and tightening the Cam.
Fix eight Bolts (A) to the Hutch Right (15) and Left (14) Boards.
ASSEMBLY INSTRUCTIONS STEP 13 Fix two Bolts (A) to the Medium Drawer Front (17), four Bolts to the Large Drawer Front (25), and two Bolts to the Small Drawer Front (22). Ax8 A STEP 14 Insert one Small Cam (B2) into the Drawer Right Board (19) and one into the Drawer Left Board (18). Making sure the grooves are aligned, attach the Medium Drawer Front (17) to the Right and Left Boards by inserting the Bolts and tightening the Cams. Slide Drawer Bottom A (21) into the grooves.
ASSEMBLY INSTRUCTIONS STEP 15 Insert one Small Cam (B2) into the Drawer Right Board (19) and one into the Drawer Left Board (18). Making sure the grooves are aligned, attach the Small Drawer Front (22) to the Right and Left Boards by inserting the Bolts and tightening the Cams. Slide Drawer Bottom B (24) into the grooves. Align the groove in the Small Drawer Back (23) with the Drawer Bottom and fasten it to the Right (19) and Left (18) Boards using four Screws (E).
Flip over the assembled drawer and attach a
• • • • DO NOT stand on the desk. Do not use the desk as a stepladder. ed. Every 6 months, check all bolts and screws to ensure they are tight. This product is California 93120 Compliant for Formaldehyde. We warrant this product to be free from defects in material and workmanship for one (1) year. This warranty is made byus only to the original end-user customer acquiring the product directly from our authorized dealersas shown by the original sales receipt.