Specifications
Surface Mount LED Downlight
Installation has never been easier!
Recessed housing is no longer required as the DLS Surface Mount LED Downlight fastens directly to most any standard 4/O
junction box. Simply remove the twist lock diuser and set your included captive screws. It’s that quick! The DLS downlight is also
versatile enough for use in most 4” or 5/6” recessed housings making it a very exible lighting solution for both retrot and new
construction. Oering either a 2700K, 3000K or 4000K color temperature and a high color rendering of 90+CRI, the DLS downlight
is also dimmable to less than 5%. It’s easy to add light with minimal eort in spaces such as hallways, bathrooms, basements,
entry ways, porches, stairways, work areas, utility closets, and corridors. You can also take advantage of the wet location rating
and use it in showers and bathrooms.
Thermally Protected
Low prole, high eciency
driver and die cast
aluminum construction
Energy Ecient
Twist Lock Diuser
High Performance
Dimmable to less than 5%
with most TRIAC dimmers
Install into recessed housings
Versatile enough for use in most 5” and 6”
recessed housings with included V-spring
adapters. Use included three clips to install
into most 4” recessed housing. Screw-in
Edison base included for quick and easy
housing installation.
LEDs oer greater than 90 CRI and R9
greater than 50 for true color rendering
Eliminates hot spots with
uniform light and allows for
easy removal during installation
Easy Installation Without Housing
Captured screws fasten directly to most any standard
4/O junction box; no housing needed