Model: 32LDVD05 32” 16:9 Digital LCD Television with DVD Player Operating Manual http://wintal.com.au Manual 32LDVD05.
Manual 32LDVD05.
TABLE OF CONTENTS 1. PreFace 1 2. Safety Precautions 1 3. Front, Back Connections 2 4. TV Installation 4 4.1 Connecting Antennas 4 4.2 AV Video Input 4 4.3 S-Video Input 4 4.4 YCbCr Input 5 4.5 YPbPr Input 5 4.6 PC (VGA) Connection 5 5. 6. 7. Manual 32LDVD05.indd c 4.7 AV Video Output 5 4.8 DVI Connection 6 Setting Up Your LCD 6 5.1 Picture Setting 6 5.2 Audio Setting 6 5.3 Source Setting 7 5.4 TV Channel Search 7 TV / DVD Combo Remote Control 8 6.
1. PREFACE Congratulations on your purchase of a Wintal LCD! Please read this manual thoroughly before operating the monitor. Make sure the monitor was not damaged in transit. Should the monitor be damaged, do not install it and contact your dealer. Check that you have all the accessories according to the model. 2. SAFETY PRECAUTIONS Place the Monitor on a stable surface. Do not use the monitor with other fixations than those provided or suggested by the manufacturer.
3. FRONT, BACK CONNECTIONS Front View and Controls Back View Back Connections DVI Input PC Audio R/L Input Y Pb Pr Y Cb Cr PC AV Out AV1 AV2 VGA Input Audio R/L Audio R/L S-Video CVBS Video Audio R/L Out RF In CVBS Video Out Wintal LCD | 2 Manual 32LDVD05.
Side View DVD Player Controls 1. : PLAY 2. : PAUSE 3. : STOP 4. : NEXT TRACK 5. : PREVIOUS TRACK 6. : EJECT 3 | Wintal LCD Manual 32LDVD05.
4. TV INSTALLATION 4.1 Connecting Antennas To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection. After installation, insertv the 75Ω antenna plug into the antenna jack as shown. 4.2 AV Video Input 4.3 S-Video Input Wintal LCD | 4 Manual 32LDVD05.
4.4 YCbCr Input 4.5 YPbPr Input 4.6 PC (VGA) Connection 4.7 AV Video Output 5 | Wintal LCD Manual 32LDVD05.
4.8 DVI Connection 5. SETTING UP YOUR LCD 5.1 Picture Setting 1. 2. 3. Press KEY until the screen displays as below. Press ► key to access image adjusting programmer. Press ▲ or ▼ key to select Mode, Bright, Contrast, Colour and Sharpness for required adjusting option. Press ◄ or ► key to adjust the setting selected. 5.2 Audio Setting 1. 2. 3. Press KEY until the screen displays as below.
5.3 Source Setting Press key until the screen displays as below. 1. Press ► key to access Input Group –Blue Screen –Language—Reset menu setting. 2. Press ▲ or ▼ key to select exact menu setting. 3. Select menu, press ► key to access TV-SCART-DVD-PC for selecting input source. * 4. In menu, choose terminal-select in sub-menu SCART CVBS or SCART RGB for input source. Press ▲ or ▼ key to access OSD , select suitable language.
6. TV / DVD COMBO REMOTE CONTROL 4 3 1 WE PO R SLEEP MUTE MODE 2 EJECT 1 2 a 3 PAUSE 5 4 5 6 7 8 9 b STOP 7 9 BACK -/-- c SYS MENU 0 CH+ PICTURE AUDIO d e i m q h l p VOL - VOL + RESUME MENU SEARCH TITLE CH- SETUP DISPLAY SUBTITLE ZOOM CLEAN BOOKMARK PBC ANGLE REP SLOW 10 12 ENTER 11 8 6 LANGUAGE A-B t 13 g k o s v u f j n r w 32LDVD05 6.
6.2 Remote Control Instructions in DVD Mode a b c e f d g i j h k m n l o q r p s u t v w 7. a. b. c.
8. ACCESSORIES Included with your Wintal LCD are the following accessories: 1. 2. 3. 4. 5. 9. AC/DC Power Adapter One Remote Control 2x 1.5V “AA” batteries One User Manual AV Cable DVD OPERATION INSTRUCTIONS 9.1 DVD Console Operation 1. 2. Press DISPLAY to bring up the Console Menu. The Console function is only available in DVD/DVD Audio/ DVD-VR/ VCD discs, and the display result may differ among these disc types. DVD-VR Console Wintal LCD | 10 Manual 32LDVD05.
9.2 DVD System Setup Menu 1. 2. Press < SETUP > key until the screen displays as photo 1. Press ◄ key or ► key to select LANGUAGE -- DISPLAY - AUDIO LOCK - OTHERS menu setting. 9.3 DVD Language Setup 1. 2. 3. 4. Press < SETUP > key until the screen displays as photo 2 Press ▼ key to selecting Menu Language –Disc Audio –Disc Subtitle- Disc Menu setting. Press ► key to adjust. Press < Enter > to confirm the selection. Photo 2 9.4 DVD Display Setup 1. 2. 3. 4.
Photo 3 TV Aspect: Depending on the type of television you have, the image adjustment offers 2 options for your setting: 4:3 and 16:9. This item is used to display image data in the wide-screen film on the normal TV set. The option 16:9 is used when the DVD player is connected to wide screen TV in Full Mode, and the screen will display pictures in full size. Display Mode item can only be modified when the TV Display mode is set to 4:3. Two options are provided: Letterbox and Panscan.
1. Dolby Digital indicates the output mode of the Dolby Digital. Two options are provided: Bitstream and PCM 2. DTS indicates the output mode of the Digital Cinema. Two options are provided: Bitstream and PCM. a. BITSTREAM: Select this option when the unit is connected to an amplifier with a built–in DTS decoder, Dolby Digital decoder and MPEG decoder, or other audio equipment with digital audio output terminals. b.
Rating item is used to set the rating level. Before you enter into the item, the system will request you to input the password first. After the password is entered correctly, the parental control rating level can be changed. If you didn’t set any password of Parental Control, the system will request you to input a new password. If you make a mistake before pressing ENTER, press CLEAR and enter your 4-digit password again.
9.7 “Others” Settings a. b. c. d. Press < SETUP > key until the screen displays as photo 5. Press ▼ key to selecting PBC - Auto Play – B.L.E. –Load Default – Screen Saver – Last player Menu setting. Press ► key to adjust. Press < Enter > to confirm the selection. PHOTO 5 1. PBC item provides 2 options: ON and OFF. Please refer to the section VCD / SVCD PBC Menu for the respective descriptions of ON and OFF option of the PBC function. 2. Auto Play item provides 2 options: ON and OFF.
9.8 Data Disc and Audio CD Playback When you insert a disc that contains WMA, MPEG and JPG data or an audio CD into the unit, you will see the media play listing pictures as illustrated on the left. 1. Press TITLE to switch among the 3 option pages of Music, Photo and Movie. 2. The Music page is divided into 3 areas: Playback List, Program List and Edit Area in the middle.
9.9 BOOKMARK 1. When the disc position that you want to set a bookmark is being played, press BOOKMARK. On the bookmark menu, you will see the following picture. It indicates a bookmark has been set at this specified position. 2. If you want to recall of the bookmark that you just set, press SEARCH and K Up/ L Down/ I Left/ J Right to move to the corresponding bookmark position, and then press Play or ENTER to begin your playback. Notes: Press BOOKMARK again to exit the bookmark menu.
10. TROUBLESHOOTING Before calling our Service Centre, please check if you can troubleshoot the problem by yourself. Manual 32LDVD05.indd Sec1:18 Troubleshooting Control No signal Please check that all cables and connectors are correctly plugged in.
11. SPECIFICATIONS Screen Size 32 Inch Display Type TFT LCD Resolution(Pixel) 1366 * 768 Brightness 550nits Color 24 bit ( 16,777,216) Contrast Ratio 800 : 1 View Angle(H/V) 170 Aspect Ratio 16:9 Power Source 100-240VAC, 50/60HZ ≤200W TV System PAL / NTSC Video Input Format PAL / NTSC Antenna Input Standard antenna socket 75 Ω Audio Output L / R 10W*2 VGA Input Format 640*480, 800*600, 1024*768 60Hz Input Video Video 1.0Vp-p 75 Ω; RCA S-Video Y: 1.0Vp-p±3db C: 0.
Wintal LCD | 20 Manual 32LDVD05.
