USER MANUAL 1
IMPORTANT SAFETY INSTRUCTIONS 1. 2. Be sure to read this user manual before operating your PVR. Never open the cover. It is very dangerous to touch the inside of the unit due to possible electric shock. 3. When not using your PVR for a long time, please pull the power cord from the outlet. 4. Ensure that there is no damage to your power cord. 5. Do not touch the unit with wet hands. If there is liquid flowing into the unit, pull out the power cord immediately because it may cause fire or electric shock. 6.
Table of Contents IMPORTANT SAFETY INSTRUCTIONS ����������������������������������������������������������������3 Instruction Markings: ��������������������������������������������������������������������������������������3 GENERAL INFORMATION ���������������������������������������������������������������������������������6 1. Preface ����������������������������������������������������������������������������������������������������6 2.
GENERAL INFORMATION 1. Preface Congratulations on your purchase of the Wintal PVR2HD. Your HD PVR is equipped with the latest technology and design; it can decode high and standard definition digital TV programs, and can also record and playback terrestrial digital broadcasts. You can view a variety of programs provided through terrestrial transmission. Simply pressing the power button on your remote control will provide you with crystal clear picture and DVD quality sound.
OVERVIEW 3. Remote Control Unit 1. Front Panel HDTV TERRESTRIAL RECEIVER NAME STAND BY CH+/ CH- FUNCTION Switch between operation and standby modes Change channel 2.
The Learning Key Your PVR remote has four learning keys plus a self-coding function. The keys can be used for the STB remote to function as any of the four keys on your TV remote. The recommended keys to use are “TV POWER”, the two grey keys below “TV POWER” ”TV/ AV”, and “SET”. The identification of ”TV/AV” key varies with the TV type. For example, identifying AV INPUT 1 2 3, etc.
B. USING COMPONENT (RGB) LEAD • Connect the antenna to ANT IN of the STB. • Connect to TV as shown. 12 C.
OPERATION Pressing the MENU key when there is no other dialogue window open, will display the main menu. The main menu consists of five menu items as shown below. • • • • • • 1. Installation 2. Program Guide 3. Program Manage 4. Program Select 5. PVR 6. System Setting Use the ▲▼ keys to move up or down from one item to another. Press the OK key on your remote to enter the selected sub-menu. To exit the menu system at anytime, press EXIT on your remote.
Add (Red key) Delete (Green key) Modify (Yellow key) NOTE: After restoring default, all programs you have searched will be erased and all parameters will return to the factory default. Please use this operation with care. 2. Program Guide Add After pressing red key on your remote, the Add Channel window, where you can set necessary parameters of the new channel, will be displayed on the screen. Frequency: You can input values referring to above by using the number keys on your remote.
cross) and finally press OK key to delete all of them from the list. Move Only one program item can be moved up or down each time. Press the ▲▼ keys to select the program you want to move and press the green key on your remote. An Up-Down-Pointed arrow will be displayed right of the selected program. You can press the ▲▼ keys to move this program to where you want. Press the green key again to confirm the new location.
will be added into Sports favourite group and shown in the selected column. If you want to deselect one program in Sport favourite group, move cursor to program that you want to delete from selected column and press the OK key, and then this designated program will disappear in selected column. 4. Program Select In the Main Menu, use the ▲▼ keys to select the Program List item, and press the OK key to enter into the Program List menu. From here, the default mode is “TV” mode.
5.2 Schedule Select the Schedule menu item and enter it by pressing the OK key. The Schedule Programs list window will be shown. Schedule mode: Once / Daily / Weekly. Once: The task will activate only on the selected date and time. To add a new Scheduled task, press the Green key on your remote. To delete existing scheduled tasks: press the Red key to delete an individual task, or press the Blue key to delete all the existing tasks. You will have to confirm your decision once you press OK.
Always: Timeshift, when set to Always ensures that the PVR2HD is always recording in the background. This will allow you to pause, and rewind live TV, as the PVR2HD buffer will have a certain amount of pre-recorded content. Pause key: If this option is selected, Timeshift will only begin when you press the Pause key on your remote. This is useful when you need to answer a phone call or the door while watching a TV, so that you can resume watching from where you left. 6.
6.4 Time Zone Adjust be displayed on the up-right corner of your TV screen. Volume can be restored by pressing the MUTE key again. 7.3 TeleText You can press the CC key on your remote to enter the TeleText or Closed Caption windows. This feature will only become active if the channel broadcast contains Teletext or Closed Captions. To exit TeleText, press the EXIT key. To exit Closed Captions press the CC key again on your remote.
If you schedule a recording via this method, you will notice a timer icon next to the selected program, indicating it is scheduled to record (or play). 7.6 [FAV] Recall favourite channel Press the FAV key to recall a stored favourite channel. Favourite channels are programmed and stored in the Program list menu. See 3.2 Favourite Edit for more information on setting up favourites. 7.7 [HDD] File List Press the HDD key on your PVR2HD remote to view a list of all the recordings available on your PVR.
7.11 File playback 7.11.1 Change file playback speed Press the REW, FF, SLOW keys to change file playback speed, a speed icon is displayed in the top left of the screen. 3. Specify your start position with the GREEN key, and your end position with the YELLOW key. Finally, press the OK key to confirm. 4. Select the OK button to cut or the CANCEL button to cancel the operation. 7.11.2 Change file playback position Press the Play, Red or Blue keys to display playback progress bar.
SPECIFICATIONS Tuner 2 Input Connector F-type, IEC 169-2 Signal Level Input -20 ~ +20 dBm Bandwidth 6 ~ 8 MHz Auto Software Setting Input Impedance 75 Ohms Carrier Mode 2K / 8K FEC Code Rate Auto(1/2,2/3,3/4,5/6,7/8) Compliant Fully DVB-T MPEG-2 Compliant Constellation Auto (QPSK,16 and 64 QAM) Guard Interval Modes 1/32, 1/16, 1/8, 1/4 Transport Stream 4 Digits LED Display Channel Number Display 8 Keys Standby, Menu, Select, Exit, Channel , VOL Rear Panel IF Input F-type Connector I
TROUBLE SHOOTING The table below covers some of the more common reasons for abnormal PVR function. Problem Likely Causes Remedy Can’t record 2 channels The RF Cross over lead is not connected Connect the supplied Cross over lead from RF Loopout 2 to ANT In 1. Front LED’s do not light AC power cord disconnected Connect power cord properly to the power socket No picture or sound Connection of Video or Audio to input terminals is incorrect. Check your choice of AV or RF is right.
HDTV TERRESTRIAL RECEIVER 36