User manual

WINTAL PVR10HD USER MANUAL

3.7 CLOSED CAPTIONS

Closed Captions is an option to display text that provides additional or interpretive information no the currently

streaming program.

If you have set closed captions to “On” under General Setup, you can press the

CC key on your remote to turn

closed captions on or off.

Note: This function needs your local operator support.

3.8 PICTURE-IN-PICTURE (PIP)

PIP allows the display of two channels simultaneously. It is a useful feature where you may want to visually see

whether a program has returned from an ad break, or if you want to keep an eye out on a sports game while

watching another show.

3.8.1 ACTIVATE PIP

Before you can use the PIP function you must enable it in the settings.

Select

MEnu  SEttINGS  GENERAL SEttINGS and press the key to enter.

1. Highlight “PIP” and press the

key to pop

up a drop-down list.

2. Select “On” and press the

key to

conﬁrm.

3. Press the

EXIT key and a message box

pops up for conﬁrmation.

4. Select “OK” and press the

key to

conﬁrm, and a reboot prompt pops up on-

screen.

5. Select “OK” and press key to reboot or

select “EXIT” and press OK key to cancel the operation.

Notes:

▪ This function is unavailable when certain screens are activated on the PVR10HD, such as the channel list screen, detailed information

window, etc. Just exit out to the main screen and try again.

▪ You can also press PIP key and activate PIP function when not in any menus.

▪ After making a change, please ensure you reboot the unit to have the PIP On or Off settings take effect.

IMPORTANT: PIP is not supported through Composite AV (CVBS) and S-VIDEO. Please make sure you connect via Component

or HDMI if you wish to use this feature.

If you have previously enabled PIP and connect your PVR10HD via composite or s-video, there will be no video output. If this is the

case, connect the receiver to a HDTV via YPbPr or HDMI and disable PIP following the instructions above.

3.8.2 SHOW/ HIDE PIP WINDOW

Press the

PIP key on your PVR10HD remote to show or hide the PIP window.

3.8.3 SWAP PIP WINDOW

Press the

P. S W A P key to switch the main window with the PIP window and vice versa.