User manual

38
WINTAL PVR10HD USER MANUAL
8.2 AUTO SEARCH
For most applications, AUTO SEARCH is the best
option to quickly set up your PVR10HD.
Select
MEnu  ChANNEL  AUto SEARCh
and press the
key.
As soon as you press the OK key your, PVR10HD
will automatically begin to search for all available
HD and SD digital channels as well as available
radio channels.
Once channel scan has completed the PVR10HD will exit from the AUTO SEARCH screen and display the first
available channel in full screen.
8.3 MANUAL SEARCH
If auto search is not finding a particular channel
and you know the frequency and bandwidth
details, then you may enter them in the Manual
Search window.
Select
MEnu  ChANNEL  MANUAL SEARCh
and press the
key.
1. Use the
key to move down to the
Frequency (KHz) field and input the numbers
using the numeric keypad on the remote.
2. When done, use the
key again to move down to the Bandwidth (M) field. Press and choose the
appropriate bandwidth from the pop up menu.
3. Scroll down to the
SEARCh tYPE field and choose either SINGLE or NEtwoRk .
4. Move up to
BEGIN SEARCh at the top of the window and press to begin the search.
Once the search is complete you will be notified on-screen whether any channels were found.
8.4 CHANNEL INFORMATION
Select
MEnu  ChANNEL  ChANNEL INFo
This window displays information about current channel,
such as PID values, frequency, bandwidth, signal level and
signal quality. This information could be helpful to identify
and solve reception issues.